Software
Houzz Logo Print
brankulo

dry areas

15 years ago

i seeded lawn last year, most of it is doing well but i have two areas that get dry quicker and the grass blades close and get thin and look dry. one area i remember has lots of locks in the soil as i remember when i was installing irrigation i dug a lot of rocks there. other area has lots of smaller rocks under surface. overall the soil is on sandy side. also these two areas have not been as dense as rest of the lawn from the beginning. they got substantialy denser this spring but that might be another reason for them getting dry quicker. i think the soil there doesnt hold moisture long enough and i am looking for a way to fix this without tearing the grass. i am thinking to put several application/ thin layers of soil or compost over these spots. maybe layer every week. would that be a good approach?

thanks

Comments (11)

  • 15 years ago

    That could work. What kind of sprinkler system do you use? When I was using the Rain Bird type of impact sprinkler I could only go a few days before the dry spots would show. Now I used a turbo oscillator type. That has fixed my dry spot problems.

  • 15 years ago

    i have rainbird rotors installed. what is turbo oscilators. whay does it makes difference?

  • 15 years ago

    I'm not sure what a turbo oscillator is, but I used to have impact sprinklers and have been switching them out with gear driven sprinkler heads and will never go back to the impact sprinklers (no offense to William H Macy's dancing).

  • 15 years ago

    This is the turbo oscillator sprinkler I like. I have seen the same one with different brand names on it at different stores.

    {{gwi:95698}}

    Impact sprinklers shoot water out away from the center. Unless you have a really good one, the stream of water shoots out over the grass and lands primarily at the radius of the shooting stream. The grass inside that radius gets a little spray but nothing like what shoots out to the furthest distance.

    The gear driven sprinklers that bpgreen is talking about seems to have built in corrections for the impact sprinkler problem. I have seen those mostly in the ground but they are available in the portable design.

    Oscillators shoot a very reliable and even pattern of water without any adjustments. I used to have dry spots all over when I used an impact sprinkler. The oscillator has fix all that. Now I can water once a week and know that the entire yard is getting an even distribution of moisture. The only problem with these is you can't use them in the wind.

  • 15 years ago

    If you have an in-ground irrigation system that was designed and installed correctly, and it applies water as expected, then the issue is probably more related to your soil's ability to retrieve and hold water. As a first attempt, you might try dchalls baby shampoo treatment.

  • 15 years ago

    i am pretty sure it is the soil. i remember coming across the thread that had info on shampoo treatment but cant find it anymore. do you guys have a link?

  • 15 years ago

    Read the thread titled "New to Keeping Lawns and Have a Watering Question", and see dchalls response. I would also expect him to post a response on this thread soon.

  • 15 years ago

    ok, so as it seems the shampoo helps the soil to absorb water. that is not what i really need. my soil absorbs water easily, i think the water goes through too fast.

  • 15 years ago

    Ok, then I would go back to your original post and agree that applying compost would help your situation.

    What type of turfgrass do you have?

    What is your height of cut?

    How much water do you apply and how often?

    Do you use fertilizer? If so, what do you use?

    Answers to these questions will help you receive additional responses.

  • 15 years ago

    -KBG
    -3"
    -i water 60mins once a week which roughly is 1" depending on conditions.
    -havent done fertilizer this year so far. otherwise bigboxstore fetilizer. playing with idea of going organic moe and more.

  • 15 years ago

    Sounds like you are doing a lot of things correctly. If it were me, this is what I would do:

    1. Take soil samples and submit to a reputable soil lab for testing.

    2. Order enough compost for 20 lbs. per 1000 sq.ft. and have it delivered.

    3. Core aerate the lawn, try to remove as many of the plugs as possible.

    4. Spread the compost evenly over the lawn, enough to fill the aerator holes in the lawn.

    5. Apply Milorganite @ 10 lbs/1000 sq.ft.

    6. Water in thoroughly.

    We actually just did this same procedure at a clients property a couple of weeks ago. I have no doubt that the TTTF/KBG lawn will reap the rewards of their investment.

    My next course of action following the above listed activity would depend on the results of the soil test.

Sponsored
Peabody Landscape Group
Average rating: 3.5 out of 5 stars8 Reviews
Franklin County's Reliable Landscape Design & Contracting