Software
Houzz Logo Print
rajivmehra_gw

HELP! String trimmer destroyed Vinyl Fence! Options?

20 years ago

Folks,

I installed this beautiful vinyl picket fence last winter. So the time comes to mow and I cannot get my lawn tractor close enough to the fence. Now the grass was about 2 ft high! I had never used a string trimmer. So I go an buy a Husqvarna string trimmer and use it to trim the grass growing at the bottom of the fence.

All goes well until I rake the cut grass away from the bottom of the fence... To my HORROR ! lot of the vinyl pickets are damaged / cut / broken right at the bottom.! Some look really ugly. It is going to cost me hundreds of dollars to replace the damaged fence sections.

Anyway...lesson learnt. NEVER USE A STRING TRIMMER NEAR A VINYL FENCE.

I wonder why they don't tell you this in the manuals or books etc etc.

[Sorry for the rant]

MY QUESTION:

What options I have for trimming grass around a vinyl picket fence ?

I have tried an electric hedge trimmer but it just got bogged down by the tall grass. There has got to be something available out there for this kind of stuff. A quick google search came up with fence trimmers/mowers but they are made for use on ranches!

What does a home owner do?

-Rajiv

Comments (18)

  • 20 years ago

    Apply Roundup to the area under fence the mower can't reach,then put down some sort of barrier over this area to keep grass/weeds from growing back.
    Mike

  • 20 years ago

    Raj; You bring up a good question. Most of the time the pickets are set high enough so all you have to worry about is the posts. If the pickets on your fence are not about 3" above grade, your fence was improperly installed. You should be able to carefully trim under the pickets with the string trimmer. You may have to do the posts with some good old shears, but they have a cordless shear for small jobs that you could use. A string trimmer can tear up anything, including a 4"x4" wood post and your gutter downspouts, so be careful.

  • 20 years ago

    Rajiv

    I know "killing the grass" sounds awful & at first thought, it would seem it might be quite unsightly. But, a well planned edging border can not only make it far easier to maintain, but also be appealing to the eye.

    Imagine for a moment using an herbicide such as round-up, or the organic alternative, 20% vinegar, to kill off a nice neat & tidy 12" or 18" wide strip of the lawn underneath your fence, and then a couple days later raking up the debris, installing some landscape edging and putting a nice 2" layer of your favorite mulch.

    Then if you wanted to, you could get creative and add perhaps some small perennials.

    The possibilities are many.

    All I'm really saying is that you don't necessarily need to resolve yourself to having your lawn under your fence.

    Good day!

  • 19 years ago

    5/22/07
    Hi!
    I have two string/nylon cord trimmers. One is a very powerful gas driven with a heavy cord. The other is a small electric with a lighter cord. Cords/strings come in different diameters to reduce this problem. I know what you are talking about because I live in a trailer with vinyl skirting. It's expensive to replace talking over a thousand. I do four other trailers too for my handicap friends. I suggest you get your self a light weight trimmer with light weight cord and use the more powerful unit to do the general yard trimming. The other suggestions mentioned in this link can be helpful too! Why not try a matching vinyl or rubber/rubbermaid skirting along the fencing if needed. It keeps the grass in line and will protect your fence next time. Good luck!
    Tbone123

  • 19 years ago

    Incidently last weekend I (again) bought a string trimmer. This time it is a cheap Homelite model. Teh guy at Home depot seemed knoledgeable so I asked him about this problem....he recommended me to use the thinnest line possible. They has the 0.60" He says the thin line + care taken will do the trick.

    I have not tried the thin line yet I have noticed that if I dont rev the trimmer (let it idle) while trimming the vinyl fence....it does not damage the fence.

    Of course I am being very careful too.

  • 19 years ago

    It's good for all to remember.

    Any piece of powered garden equipment has one purpose in life. To in some form cut, spindle, mutilate, chop or otherwise destroy something. It has no mind of its own and when it does its job to human flesh, fences or trees it is because the operator mis-understood the purpose and operation of the machine.

  • PRO
    8 years ago

    Very sorry to hear about your fence. Note that we have a product that will help prevent such damage to your fence now and in the future from ever happening

    Please check out the following white powder coated, full protection version below.

    https://www.houzz.com/products/fence-armor-galvanized-steel-post-guard-white-full-35x35x3-set-of-2-prvw-vr~109861863

    Should you require any more information, please do not hesitate to ask us.

  • 6 years ago

    That isn't going to do anything to protect the panels . I wanted mine ground level so my dog

    don't try to dig under the fence. Why is there not some kind of bottom skirt that will be like 6 inches tall by 8 foot long that could take weed wacker? this is 2020 someone needs to make a product for this.

  • 6 years ago

    Check back in 13 yrs for an update Ken !

  • 6 years ago

    how much do you need? I have seen vinyl edging steel edging and rubber edging maybe you could but it up against the fence...overtime it may need to be replaced but it probably would take a while before it got to that point... your fence would be protected.. you would not have to add mulch or anyting.... just a thought...

  • 6 years ago

    Of your Vinyl fence was installed correctly, edge trimmer should not damage your fence.

    Most companies supply DI without proper instructions or install incorrectly.

    PVC posts must be filled with steel re-enforced 25MPA concrete.

    If this is done, the fence will not be wobbly and the concrete inside make posts solid, not allowing the force of edge trimmers to push in the vinyl / PVC in order to damage it..kindly see: www.valuefencing.co.za

  • PRO
    6 years ago

    Hi Willie,


    Thank you for your comment.


    We have provided a few photos below showcasing lawn mower/ weed trimmer damage to vinyl fences and then showing the solution.


    Due to Vinyls 1/8th wall of thickness, it can be damaged by weed trimmer damage, especially if it gets too hot or too cold. It also has the trouble of getting discolored with colored

    weed trimmer string.


    To ease worries and add beautiful curb appeal, Fence Armor is the best defence.







  • 6 years ago

    Nice product !

  • PRO
    6 years ago

    Thank you so much, we are happy you like it. If you are interested in learning more you can visit us at our website - www.fencearmor.com. Have a wonderful day.

  • 5 years ago

    How do you all stop the cut grass from clinging and sticking to a white vinyl fence along with the black marks the trimmer leaves behind. The lawn looks great but the white vinyl fence looks horrible!

  • 5 years ago

    Using a lighter & less aggressive gauge trimmer line helps in reducing any marring of the vinyl fence post . Also using ornamental or decorative coloured crushed stone around the fence post eliminates the grass or weeds around the fence post , again reducing potential for inadvertent damage to the vinyl posts.

  • 5 years ago

    We looked at replacing indiviual pickets that the weed trimmer destroyed. Our model was no longer available. we just cut off the bottom of each picket even with the bottom rail. Saved a heck of a lot of money. Looks great and now easy to trim.

Sponsored
Urban Upkeep LLC
Average rating: 5 out of 5 stars6 Reviews
Columbus High Quality Painting Expert