Software
Houzz Logo Print
kevingalaxy

Am i mowing too high? HELP

17 years ago

Hi, i have mowed my lawn at the second highest setting for 2 years now (3 5/8) inches. Last fall i took out all the crabgrass and chickweed and reseeded the patches and it grew really well, Nice thick lawn.

Now all of a sudden i have large patches of chickweed/clover growing in it? Am i mowing it too high as the blade doesnt cut the leaves off the chickweed/clover as its shorter than my blade?

Should i lower the setting? Or just pull them all out again in fall and reseed? I am stumped as i thought i should mow high?

Comments (13)

  • 17 years ago

    Weeds are almost inevitable. If you can get your lawn full enough, it can help crowd out weeds. If anything mowing high discourages weeds.

    How often are you watering? Or have you been getting lots of rain?

    When do you fertilize, with what and how much? How big is your lawn?

  • 17 years ago

    lawn is 3000 sq ft,
    i fertilized using nitrogen with iron 6 weeks ago,
    have had lots of rain here in NJ (2 weeks almost) so haven't watered but the grass is deep green and looks healthy.

  • 17 years ago

    How many lbs of actual N did you apply?

    If you've been getting regular rain and your grass isn't thick enough to keep the weeds out, they're going to germinate. Spot spray them with a broadleaf weedkiller once the rains stop. Fertilize twice in the fall, applying 11 lb of actual N per 1000 sq ft each time. The second time should be after the top growth has stopped, but while the grass is still green.

    Weeds will germinate where there's bare soil, so if you can get your grass thick enough, the weeds won't have anyplace to germinate.

  • 17 years ago

    Chickweed really sucks. The last 3 springs, I've had some crazy infestations of it. What is strange is that it would grow very well in some of the areas of my TTTF lawn that were very thick as well as in thinner places. My problem is that I reseed almost every fall, so I can't get pre-emergence herbicide down before the stuff germinates in fall. I always put pre-m down in February, but it doesn't seem to help much with this stuff. I feel your pain.

    I've sprayed it with Weed Be Gone and that just seems to weaken it, rather than kill it. Definitely takes more than one application to get rid of it. Luckily, chickweed does die off when it gets warm. Good luck!

  • 17 years ago

    "Fertilize twice in the fall, applying 11 lb of actual N per 1000 sq ft each time."

    Is that a typo? Shouldn't it be 1 lb? 11 lbs per 1k is enough for 6 years.

  • 17 years ago

    I used the standard spreader settings on the scotts label, have no idea how many pounds that is. Ill try a reseed this fall to thicken it up even more.. thanks!

  • 17 years ago

    "Is that a typo? Shouldn't it be 1 lb? 11 lbs per 1k is enough for 6 years."

    Oops. Typo. You're right. 1 lb, not 11. 11 would kill everything for quite some time.

    I never go by the spreader settings because there are too many variables that can affect how much goes down. Instead, I measure the lawn to determine the square footage, then calculate how much fertilizer I need based on 1 lb N per 1000 sq ft. I generally set the spreader at a lower setting and make multiple passes in different directions and just keep going until it's all gone.

  • 17 years ago

    Should i mow at 3 inches instead of 3 5/8? I see the clover/chickweed leaves are intact after i mow?

  • 17 years ago

    Mowing lower won't kill the clover. You could probably mow at 1/2 inch and still have intact clover leaves.

    What you're doing by mowing high is keeping future weeds from establishing because you crowd them out and deprive any seedlings of light.

  • 17 years ago

    You can never ever ever mow too high

  • 17 years ago

    so is it ok to mow at 3.5" or even 4"? I have a front yard area that I try to mow at 3" during the summer heat and drop gradually down to 2" by the start of winter. I have a side yard that we never really walk on or use that I've been slowly moving up to 3.5". I figure if I can mow out there less often and the grass is taller I'll have fewer weeds, right?

  • 17 years ago

    My neighbor on the left mows at his lowest setting. My neighbor to the right mows on medium settings. I mow on my highest setting.

    Left neighbor's lawn is entirely clover and weeds, right neighbor's lawn is half clover and weeds, and my lawn has spots of weeds.

  • 17 years ago

    > "You can never ever ever mow too high"

    It is all realative. If you have a dense turf, wheather you mow very high, medium, or low; you are going to have fewer weeds.

    Yes you can. During periods of high rainfall and humidity, you should bring the mower down 1 or 2 clicks - specially KBG in the transition zone during the summer months. The recommended mowing height for Bluegrass during the summer and during periods of high rainfall is 2.5 inches. During drought, 3 to 3.5 inches MAX. Tall Fescue can be mowed at 3 inches during extended periods of high rainfall during the summer, 3.5 to 4 under normal to dry conditions.

    Tall Fescue can be mowed at the highest setting on the mower, Bluegrass might not. Some Tall Fescues lose their density when mow to high, some don't.

    The only time Bluegrass will be mowed higher than 2.5 inches is when mixed with Tall Fescue.

    Your best defence against weeds is a dense turf, then pre and post emergents.

Sponsored
Peabody Landscape Group
Average rating: 3.5 out of 5 stars8 Reviews
Columbus' Reliable Landscape Design & Contracting