Software
Houzz Logo Print
harmonyfarms_gw

Bubbler Fountain?

20 years ago

I am not sure if this is the best place to post this question, so please advise.

I would like to build a bubbler type fountain. I saw one on vacation. The water came over the rock and then 'disappeared' into the pebbles below. This was pretty big and obviously built on site. It was very child (and pet) friendly because there was no water to fall into. And because it was moving would not be a mosquito haven.

Give me your thoughts or links! THANKS!

Comments (6)

  • 20 years ago

    Harmony,

    I, too, like the disappearing fountains, especially if there is a water course leading to it. I get the sound of waterfalls without the pond. I am planning one for next summer.

    VERY basically you need a waterproof hole with a (protected)pump in it with a cover of some kind that can hold the weight of the stones, fountain, etc. And a SAFE source of electricity or a solar pump.

    There are many different ways to achieve this, and if you do a Google search on DIY Disappearing Fountain, you will get all kinds of results to check out.

    Reader's DIgest has good basic information to start on:
    http://www.rd.com/content/openContent.do?contentId=28278

    One of the important things is to make sure your pump is protected from getting debris or stones in it.

    Also, try a search here at Garden Web.

    Good luck and have fun. Please post a picture when it is finished.

    Anne

  • 20 years ago

    "Pondless" is one of the key words that seems to be popular these days, i.e., pondless fountain, pondless waterfall...

    Might prove helpful to use that when you do your search, here and on Google. :)

    Brenda

  • 20 years ago

    There was a website that you could buy a kit for doing these but I can't find it now. It had all the plumbing/parts you needed for 3 fountains of water at different heights.
    Basically, you just need a reservoir in the ground such as a stock tank, large rubber tote, etc. A pump and fountain kit and a piece of heavy plastic grate, steel grate or expanded metal larger than your hole. Bury your reservoir, setup your pump and fountain inside so the the fountain will be slightly above ground level. Place the grate over it. (you will probably need to run your fountain head through the grating). Fill the reservoir, plug in your pump and make any necessary adjustments. When it is running the way you want it to, cover the grate with the stone of your choice.

    I also found this site which does it a little different. This would probably be easier too. The only thing that bothers me about this method is that I would think it would be pretty easy for your pump to get clogged up and not so easy to pull it out for cleaning.

    http://www.dakotaaggregate.com/diypond.htm

    Here is another site with some instructions.

    http://www.nelsonwatergardens.com/disappearing_fountains/dfi2.html

  • 19 years ago

    As one member said, 'disappearing fountain' is what you want to search for. You can purchase a kit with everything you need (can be pricey, $200 and up) or purchase the materials separately and save a bit of money. I was able to put one together myself for about $150.

    Material list:
    - Pond form or other shallow container
    - Small to medium fountain pump
    - outdoor extension cord and waterproof conduit
    - Pump tubing and connectors (PVC or copper tubing works too)
    - Fountain nozzle
    - concrete blocks or bricks
    - Plastic or metal grate cut to fit just larger than your pond form.
    - River rocks or decorative gravel
    - Ceramic pot or faux stone orb with a hole drilled through it (real stone if you can afford it!)
    - Plumbers putty and/or silicone caulk

    First you need a basin to sink into the ground for the water and pump to live in. Pre-formed pond liners work great. Lowes has a shallow 9-gallon pond form for about $12. You could also use shallow plastic planters that have no drainage holes (or seal the holes yourself), or dig a hole and put in a flexible pond liner.

    In the pond liner goes your pump and the water. You'll need some concrete blocks or bricks placed evenly around the basin to support a heavy-duty plastic or metal grate, which will protect the pump from debris and support the weight of the river rocks that will hide the basin. Metal is best because plastic gets brittle over time. Expanded metal grate like that used to make covers for fire pits is good. Some people have used chicken wire, which is flexible so will need plenty of support underneath.

    Also on top of the grate is an object for the water to flow through and over. Make sure this is supported by a brick or concrete block if your grate is even remotely flexible. You can find the round faux stone orbs with a hole drilled through them at specialty garden and lawn decor centers, or use a ceramic pot for the water to fill and bubble over.

    You'll need some tubing and connectors along with a fountain nozzle to travel from the pump up through the grate to your ceramic pot or faux stone orb. If you are using a ceramic pot, make sure the fittings around the hole in the bottom of the pot are water-tight so the pot will fill with water and bubble over the sides. Use the plumber's putty and caulk for this.

    Here are links to some great articles that helped me with my project:

    http://watergarden.com/store/docs/Waterfall-Kits/building-disappearing-waterfall.htm

    http://www.gardengatemagazine.com/extras/46ezwaterfeature.php

    http://landscaping.about.com/cs/pondwatergarden/a/water_fountains.htm

  • 19 years ago

    Did you by any chance see it in vermont? In front of stratton mountain, where all the shops are? I was there and saw the exact same thing, I'm sure there are alot more of those around the country but I'm just wondering.

  • 18 years ago

    the larger the inground container the better unless you enjoy standing over it with the water hose. ;) I did one a few years ago and there is lots of evaporation. I didn't have it location near a hose and it was a chore to keep water in it. I had 1/2 plastic 55 gallon drum in mine and it was still hard to keep water in it. I used a brick or block can't remember which to get the pump up off the bottom so it wouldn't get trash in it.
    good luck with your project. :)