Software
Houzz Logo Print
priest_gw

building for propagating yuccas

18 years ago

Hello everyone, I wondered if you might be able to provide some advice for a novice nurseryman.

So, I am in the design phase of a building for propagating hardy yuccas and other succulents and cacti.

Most of the species will be grown froms seeds, and some from cuttings.

My idea is to have a 14 x 40 ft concrete slab poured with short footing. The slab will be equipped with floor drains. The plan is to have a building similar to a storage shed constructed on the concrete slab. The South wall will be left open (only framing) at first. All the other walls and the roof will be eclosed with OSB and insulated (shingled roof). It will look exactly like an insulated storage building, only with no floor . . . and the South wall will be polycarbonate greenhouse material. Pluse there will be exhaust fans and a heating system of some sort.

The interior of the structure will receive no direct sunlight during the summer months (there will be an eve on the roof), helping to keep temperatures down. It will obviously receive a lot of sun from the South in the winter (there are no trees or obstructions).

The structure will be used to propagate seeds/cuttings in late winter or early spring, and to house young plants through the winter. Plants will be moved outdoors in the spring and brought in the fall for there first 1 or 2 winters. Then they will be kept outdoors permanently, making room for the next generation in the greenhouse.

The reason for not making it a regular all-polycarbonate greenhouse is for insulation purposes, and because the pre-made storage shed design is fairly economical. One nurseryman has suggested that the yuccas will not get enough light, but they will be outdoors for probably 7 months a year.

Any advice or obvious flaws in the plan?

Thanks

Comment (1)