Software
Houzz Logo Print
rocket4th

Briggs and Stratton 42A707

15 years ago

In replacing the starter I had to remove the flywheel. I may or may not have had to remove the flywheel but I trapped a wratchet wrench on a tight, inside bolt. doh!

Before removal I measured the air gap at .006 but the edge was rusty and don't know if that was accurate. That makes me suspicious now that it turns over but doesn't start.

TIA and keep your boots muddy!

Comment (1)

Sponsored
Franklin County's Heavy Timber Specialists | Best of Houzz 2020!