How do you split Pecan without the stringy issue of it holding

12 years ago

How do you split Pecan without the stringy issue of it holding together? Is it seasoning, variety grain structure issue or what? A friend has plenty that needs splitting and I told him that is a challenge.

I have tried cutting 4-6Ã¢ÂÂ to give the splitter leverage to split it but the strings still hold most pieces together (requiring a hatchet to continue, while sitting, LOL). Another friend with a larger saw cuts approx 6-8Ã¢ÂÂ slices and cut 6-8Ã¢ÂÂ blocks from the slices.

Thanks!

Sort by:Oldest

Comments (5)

loger_gw
Original Author
12 years ago
One friend cuts his pecan firewood into slices, then blocks (attached). I would say mainly due to not owning a splitter and the pecanÃ¢ÂÂs resistance. That is some good burning in a bed of coals.

One of my solutions is to cut my pecan short enough that the ram can almost touch the wedge (adjusted) to cut the strings. That works fair if I stay with 12 dia wood. My father said wait until a freeze but I plan to be inside. LOL.. I can maybe see his point if the wood is not seasoned. Plus I doubt his ref was to pecan vs oak.
wertach zone 7-B SC
12 years ago
It is the wrong time of year for my suggestion, but I will add it in case someone can use it.

Way way back, many many years ago, I sold firewood to help make ends meet...... I would cut the tree down and in to lengths the day before a hard freeze.

I would split it early the next morning, with an ax, no stringy issue!
Related Professionals
Ocala Landscape Architects & Landscape Designers · Spartanburg Landscape Architects & Landscape Designers · Leominster Landscape Architects & Landscape Designers · Bangor Landscape Architects & Landscape Designers · Sioux Falls Landscape Architects & Landscape Designers · Queens Landscape Architects & Landscape Designers · Jonesboro Landscape Contractors · Monroe Landscape Contractors · Burlington Landscape Contractors · Fall River Landscape Contractors · Hudson Landscape Contractors · Hot Springs Tile and Stone Contractors · Waterbury Tile and Stone Contractors · Pittsburgh Tile and Stone Contractors · Sanford Tile and Stone Contractors
loger_gw
Original Author
12 years ago
Thanks! This ref back to my fatherÃ¢ÂÂs advice and a shocking dangerous experience I had. I was cutting an Oak tree or Mesquite during a freezing day and when the tree started to hinge, Ã¢ÂÂIt Snapped Completely Off The TrunkÃ¢ÂÂ. Too many Ã¢ÂÂTrue Experiences and Widow Makers StoresÃ¢ÂÂ got my attention. Ã¢ÂÂButÃ¢ÂÂ! There Are No Ends To The Dangers.

Be Careful And Walk Away If You Think There Will Be A Problem!!!
wertach zone 7-B SC
12 years ago
I know what you mean about "Widow Makers" loger, I've got a huge dead oak tree that could possibly hit my house if it fell.

I have been working at it a little at a time since I'm afraid it will drop a big limb on me while I'm cutting it.

I took my backhoe and gave it a few good jolts as high as I could reach without being in the danger zone. Then I used a ladder to cable it off, as high as I could, to a healthy tree so that if it falls it can't hit the house.

I go out about every 3 weeks and jolt it. I'm down to about 10 big limbs now.

When I get them off I plan to use a rope type chainsaw up high, I hope my plan works!

I talked to a tree service and it would be over $2000 to bring out a bucket truck and take it down!

I know my life is worth more than $2000, well except on my wife's part, since I have a $200,000 accidental life insurance policy! ;) Unless I happen to accidentally walk under that tree and a limb falls I can wait!
loger_gw
Original Author
12 years ago
"When I get them off I plan to use a rope type chainsaw up high, I hope my plan works!"

I hope it's not the rope type saw that I used until my neck had all the looking up it could take on 2-4" limbs. It worked fair with two of us a distance apart to eliminate the chain getting pinched. With dead wood and old enough, they might snap before too much work. I feel my saw is retired.