Software
Houzz Logo Print
grovegreenguy

American elm propagation ?

13 years ago

While driving through a parking lot, we were stopped in our tracks by an American elm (about 18 ft tall) that totally stood apart from all others. The single stemmed specimen having a beautiful informal tiered shape and clothed in very dense foliage, its nearby companions were non-descript and lanky, all likely originating from local seed grown stock. My friend kept saying "I want "THIS" tree! Unfortunately, neither of us had a camera on hand, though we'll soon be returning. This could also be a named selection, though I haven't seen photos that show any resemblance.

I've done a bit of research on elm propagation and I'm good with grafting and budding, especially chip budding. Here in zone 3, it's now a bit late in the season to bud onto a rootstock ... though, I'm wondering if chip budding and or grafting of elm is successful in the spring? I understand that summer cuttings will also take, though I'd like to get this find onto a strong rootstock for fast establishment.

Thanks from Terrance

Comments (3)

  • 13 years ago

    Several choices, all best to wait till earliest spring or at least November. If you can get back in November, take small cuttings. Pop in a plastic bag with a spritz of water on a paper towel placed in with them. Pop in fridge till you can wake up a rootstock...small potted elm. You can dig a small elm now, or buy a small one at a garden centre. Make a splice or saddle graft, any graft really, as soon as the stock starts pushing its buds. Second choice, dig up a root piece as big around as a pencil as soon as the frost goes. Make sure to pot the root piece right end up. The cut end usually sends up several shoots and continues to grow. You can thin the shoots gradually as the little tree grows. Try rooting a chilled cutting after a month in the fridge. Scrape the side to expose some green, treat with up to 8000 PPM IBA3 in talc, then pot in sterile peat, or sand or pearlite. Cover with a plastic bag and put in a warm place. wait, wait, wait....could take more than 8 weeks, or just 3 weeks, hard to say. I'm sure there are other methods too, but this what I've tried. Perhaps other have a different method they can share. If you know who owns the tree, you could do an air layer, and come back for it when it's rooted.

  • 13 years ago

    Thank you jocelynpei. I'm not so familiar with elm propagation as compared to some other species of trees and was unaware that root cuttings could be used in this particular case. Though, I might get a few looks if I'm digging around a tree situated in a parking lot :) ... so, I'll probably go ahead and purchase a few small seedling trees for rootstock and do the grafting next spring. The tree is about 40 mins away, so it's not too far out of my way to later collect scion wood.

    Terrance

  • 13 years ago

    Graft the scions very low and then plant with the graft at soil level. You can mound up the soil later in the hopes that the scion roots. Sometimes they do, sometimes they don't. Elm grafts often fail in a bad winter, so an own rooted cutting will be better. You can even graft a scion on to a rootpiece, and plant that at the usual soil level. In this case, the graft has a real good chance of rooting. Root piece grafts need to be waxed to prevent rot till they heal up. Get a root piece late in the fall from a tree in the woods or where ever, then pot it up and chill it.