Software
Houzz Logo Print
kimberly_ussher

Windowbox question....

15 years ago

My latest gardening project is that I built two window boxes for the front of my house. They will be painted and mounted on corbels prominently in the front of my house street-side.

Currently, I have old planter boxes that are tiny, under-sized for the window space and I cannot wait to remove them! This is more of a shady-semi-sun area, so mostly impatients and leafy type of plants. I wish it was full sun! So many more planting options with full sun.

I am now 'stuck' on how to line them so they won't rot. Since, I made them out of wood (mistake #1) and I didn't make them 'standard' sized so none of the manufactured windowbox liners fit (mistake #2), I don't know what to do?

Do you have any suggestions as to how to protect my new windowboxes from rot? The dimensions are as follows:

Length: 48"

H: 7 1/4" (planting space) (exterior:9 1/4")

D: 6/12"

Thanks for any help you can provide!

Comments (11)

  • 15 years ago

    Since you've already built the boxes it is too late for my suggestion. It would have been to make the bottom out of galvanized hardware cloth and then to line it with peat moss. The main thing that's going to cause them to rot is the wood staying damp all the time.

    Maybe you could line it with plastic sheeting with holes poked in it for drainage. I assume you've got holes drilled in the wood bottom. If not, you'll need em.

    John

  • 15 years ago

    What kind of plastic sheeting would you use and how would you attach it? Glue?

    Thanks!

  • 15 years ago

    What kind of wood did you use? Regular pine will rot very easily but something like cypress or cedar is more resistant.

    Maybe you could find some rigid plastic or thin plexiglass at the hardware store to line it with. If you cut it carefully to fit and caulk the joints, you would probably be good to go.

  • 15 years ago

    Make a mixture of RV drinking water tank winterizing fluid (ethylene glycol) and 20 mule team borax (boric acid) and paint or soak your wood with that. Let it get absorbed into the wood really well and it prevents and destroys existing wet and dry rot in timbers when used in combination with an ethylene glycol as a carrier to treat the external wood against fungal and insect attack. Termites won't eat it either and it also will be fireproofed. Once absorbed into the wood and dry you can paint it as normal.

    Any RV dealer should carry the water tank winterize fluid. Heating the winterize fluid makes it easier to dissolve the 20 mule team borax in it.

    Its like making your own pressure treated wood without using the nasty poisons.

    Lou

  • 15 years ago

    (sigh...)...Regular pine... ;)

    I like the plexiglass idea. I will have to be really creative and think 'outside of the box' on this one. (okay, a pun....I just couldn't resist...)

    I'll be painting it really well with oil-based primer and several coats of exterior paint, so it will be sealed up tight.

    This is my main hurdle before it's done and ready to be hung under the windows. It's quite fancy and I'm anxious to figure this part out.

  • 15 years ago

    I think you missed Lou's post. I like his idea, cheap and easy!

  • 15 years ago

    Oh....I did miss it. Very interesting! Is this similar to Kilz? Could I just use that?

  • 15 years ago

    Kilz is only an anti-fungal paint primer and not a wood preserver. It's nothing even close to what I was suggesting.

    I make a non toxic wood preservative. You can use it for wood handle rakes & garden tools, raised bed planks, etc.
    Pressure treated wood is toxic to people, this mixture is not toxic to humans unless you eat the whole wooden plank, but I think all the splinters when you move your bowels would kill you first.

    Lou

  • 15 years ago

    Lou....you are pretty funny! ;-)

    So, do I paint this stuff on or soak it? I just don't want to be left with 'extra' that I don't know what to do with.

    Is ethylene glycol explosive?

  • 15 years ago

    The ethylene glycol is a non toxic antifreeze. It is only being used as a carrier for the boric acid (in the borax) to get absorbed by the wood. The boric acid is not water soluble but it will dissolve in ethylene glycol (a type of alcohol) and then be absorbed into the wood.

    You can paint the mixture on the wood with a paint brush, the object is to get as much boric acid into the wood as you can. Paint a coat, let it dry, paint another coat, etc.

    Wood could be soaked in it if you make a huge batch, but in your case I would make a small batch and paint it on, let it dry, then another coat. Paint coat after coat until it's all gone.

    Once totally dry then you can paint the box with your color choice paint. The wood will stay preserved even if the paint is penetrated later through aging. The wood will expel water, not absorb it once treated because the boric acid (now in the wood) is not water soluble.

    It's about as explosive as a can of beer or a glass of wine.
    (I'm trying to say all this without getting technical)
    Lou

  • 15 years ago

    Pretty cool! Thanks for the suggestion. I will give it a try!

Sponsored