Software
Houzz Logo Print
chuck60

Again with the cages

16 years ago

I know this has been beaten to death, but here goes anyway...

I need at least 20 more cages and I just found a 150' roll of CRW for $79.95 at Menards. It's coming up on my birthday, so I plan to ask SWMBO if I can buy myself an early present of a roll. Now for the question.... I know how to make the standard CRW cages, but storing the 18 I already have, plus however many I can make from the roll, is going to be a challenge. It seems to me that I should be able to just bend the cut wires such that the circles can be formed in such a way that I can easily take them apart. Flat pieces of the mesh would take up much less storage in my shed. Anyone do that? Are there more creative ways to form the cages so they can then be taken apart for storage?

Chuck

Comments (10)

  • 16 years ago

    Just bend the attaching wire in a U shape and don't close it. It should come right apart when you squeeze the cage from the sides.

  • 16 years ago

    Agree with Taz - that's what I do. You end up with a pile of 1/2 circles.

    Another option is to also buy yourself one of the containers of bulk plastic tie wraps they sell - Home Depot and Lowe's have them so I'm sure Menard's will too. Use the plastic tie wraps - the heavy duty ones so they will last all season - to hold the trimmed ends together. Come season end just snip the tie wraps with scissors and it all springs apart.

    Isn't it funny some of the things we gardeners want for our birthday presents. ;)

    Dave

  • 16 years ago

    Good to see this thread. Just today it occured to me that I better figure out my new tomato support strategy, since I have about 4 times what I had last year, ready to go in this weekend. So, what exactly is the material to use? If it's flexible enough to be sold in a roll, is it strong enough to keep shape under weight of the vine? How large a cylindar am I aiming at? --Amy

  • 16 years ago

    Amy,

    the material of choice for cages is called Concrete Reinforcing Wire (CRW) or also called remesh at many places where it is sold. The $79.95 price for a 150 foot roll is pretty good right now as every other place I checked was at or over $100. The material is also sold in flat sheets if you only need a few cages, but the price per cage is higher. CRW cages last a lifetime. They can be painted if you wish, or they can just be allowed to rust. The holes are 4"x4" I think, and many people clip the bottom wire to make spikes to help hold the cages in place, while others, who have high wind problems, will also use a t-post or something else to hold the cages in place. My only problem with the cages is storing them, and the guys have come through as usual with good suggestions. I made my old cages with twists to the wire such that they would be difficult to take apart, but I'll make the new ones so I can store them as flat as they will go.

    Chuck

  • 16 years ago

    My father always did the CRW cages, and I always found them inefficient by design. Do I plant inside the cage or outside? Then what about the branches that grow into the center of the cage? How do I effectively tie them to the cage? Picking was even more awkward as not all the fruits fit thru the 4x4 holes in the wire, not to mention trying to reach them inside the cage. They had to be staked or they blew over when the plants were to the top, and then there's the joy of trying to figure out what to do with them in the winter. So I started thinking.

    What if I took those cages and opened them up so they were flat, and attached them to a metal fence post on each end? Better, but still a lot of "heavy metal" to store in the winter. Lightbulb!! The extra 2" x 2" deck post spindles. Pressure treated so they don't rot, easy to drive into the ground. Now for the mesh. Needs to be light but sturdy, and should last a long time to be cost effective. I found some green mesh temporary fencing rolls at the GC, 1" mesh 24" x 30', perfect. For my site, 12' is the best length. Cut the mesh to length, drove in 8' stakes 18" into the ground, 3 per 12' and stabilized with a 1x2 across the top to tie them all together. Then attached the mesh to the posts with a staple gun. Brilliant, if I do say so.

    If the tomato stems don't go thru the mesh by themselves, a little gentle persuasion ensures that they do. They can also be tied to the mesh with twine when they are heavy with fruit for extra support. The posts and mesh have now lasted for 15 years, so the initial investment is well amortized.

    They look great in the gardem, and in fall everything is disassembled, the mesh rolled up and stashed in the attic of the utility shed, and the posts are leaned in a corner. Simple, elegant and effective. This year when I set everything up I'll try to post pictures.

    Steve

  • 16 years ago

    THe holes in mesh I can get at HD are 6 x 6" -- plenty big to reach in and pull out tomatos. I'm not trying to set any records on biggest single tomato! Question: THe mesh is basically pre-rusted. Very rusty as is on the store shelf. Any reason to be concerned about that? I dont' mind rust in the garden aesthetically or anything.

    Missed your response, since I couldn't find the box to check for recieving a notification of postings on the thread.

    My tomatos are all out now, which I did without the supports in place, and they're growing like crazy so I must make the supports ASAP.

    Amy

  • 16 years ago

    The rust poses no problem. Lots of rusty old CRW cages in use out there and iron oxide (rust) is normally found in most soils.

    Some have gone so far as to spray paint their cages for appearance. I prefer the rustic look. ;)

    Dave

  • 16 years ago

    haha, tomato gardeners are easy to buy for when birthdays come around. Happy gardening and Happy Birthday. :)

  • 16 years ago

    Last year I was going to get the "sheets" of CRW at Home Depot and they were not rusty. Bending slightly to fit in my station wagon, the seams/attachments started popping off from one another. I decided not to buy these.

    THEN I had a friend who does concrete work cut me pieces of 5 foot tall rusty rolls. Each piece was 5 1/2 feet, and I bent into circle and fixed the cut wire around the other side. Only a few dollars per cage (he cut them off his big 150 foot roll I believe) The tomato branches were well supported (inside the cage). So, I am not sure if you can really use the non-rusty flat sheets (are those aluminum or some other metal??) to make round cages.

  • 16 years ago

    My CRW cages are into their 16th year. They are outdoors all year long. They are getting very brittle and breaking apart in some areas from rust. But still usable. If I get 20 years out of them I'm lucky. So rust is an issue if left outside year round and used 20 years...:-)