Software
Houzz Logo Print
bostoned

GE Appliances - worth replacing recall with same?

14 years ago

Hello folks,

I have three major GE appliances; Profile gas range; Nautilus dishwasher; and over the range Spacemaker microwave. Due to a recall on the dw, GE has offered to reimburse either $100 or $300, depending on the GE model I choose to replace the dw with. Recently, my mw started sparking when used so I have decided to replace that as well. The appliances are about ten yrs old now.

Of course, after reading reviews about GE appliances on this site, I'm not sure that it will be worth it to replace with the same brand. That is my question. As GE is offering to pay $300 towards a GE Monogram dishwasher (or $100 for a lesser model), would it be worth it or should I just invest my money in a more reliable brand.

Thanks for any input. - Eroz

Comments (3)

  • 14 years ago

    I have some recent experience with a GE dishwasher. It is a "Profile" model, about 5 years old. Compared to older GEs, this model is much quieter. They have definitely improved the sound deadening. Unfortunately, the quality and performance of the machine simply does not meet my expectations.

    While the inside of the machine is made to slightly resemble a Bosch or Miele, close examination reveals super-cheap construction, difficult to maintain and service parts** and poor performance.

    I simply cannot get things clean in the GE that my Bosch routinely handles. While I am seeing a bit better performance from the GE after switching to Finish Quantum tabs, it still does not rival my Bosch.

    So I would not recommend a GE dishwasher at all based upon the performance of this supposedly upmarket "Profile"

    **Examples of lousy design and cheap construction: The upper rack wash arm requires a tool, a 1/4" nutdriver, to remove for cleaning. (On my Bosch, all of the spray arms are removable without tools for routine cleaning and inspection for obstructions.) That arm, when removed for service, has only a small "trough" for the water passage and no easy way to get obstructions cleared. The lower arm, though removable with a tool, is similarly constructed of cheap plastic. When I removed the arm for inspection and cleaning, a bushing that serves as the bearing surface for the arm spindle just popped right out of the machine. It should be retained within the pump and not come flying out when simply removing an arm for cleaning. Additionally, there is often some piece of foodstuff found remaining in the bottom of the machine after a load. I only scrape, I NEVER rinse. The Bosch obliterates that kind of stuff, the GE leaves it sitting on the bottom of the machine. Poor quality and disappointing performance are enough for me. You will not catch me recommending a GE until I see better quality out of them. Think Bosch or Miele.

  • 14 years ago

    Thanks for the informative reply Mojavean. I was at Lowes today and was attracted to the look of the Boch. I already own their washer & dryer so I have some confidence in Boch.

    Does anyone have an opinion on the GE Monogram? I have not seen a model in any big box store?

  • 14 years ago

    I have the same questions. I really like my Profile Triton but the pump is going out and now there is the decision of what to do. I'd like to know more about the Monogram.