Software
Houzz Logo Print
cjzimmer1

Selecting freestanding induction range and Installation Questions

15 years ago

I've been reading about induction for over a year now and I "think" this year will be the year I can finally afford to buy one, so now I have to get down to the serious business of picking one out.

I need a freestanding model which from what I can tell, my options are Kenmore, Electrolux (with double oven), Frigidaire and the GE profile. (I've already bounced the Samsung because of lousy burner configuration).

Here's a few questions I have and hope someone has experience with them.

I do most of my cooking from scratch (and I have 5 kids) so a normal meal would have me using a 10" fry pan and 2 8" pots. Since it's hard to really tell from the pictures, can anyone tell me if one of those models will be better than another for the size pots I have?

I also do canning (right now just water bath but some day I hope to do pressure canning as well). My stock pot is 10 1/2" and my canner is 12" (I will need to replace the canner but I'm assuming an induction capable one will still be that big), and both of these would need to be operating at the same time. Can I put a 10 1/2" and 12" pot on burners that are only 8" (or 7" for the Frigidaire) and 10" (or 11" for the GE)? I know there is some issue of matching pot sized to burner size but I'm coming from a coil burner so size never mattered as much there.

Next questions is about the Electrolux's smaller oven. Is this deep enough to bake bread in(it would need a 5-6" clearance)? I've been unable to find measurements for it. I'd love to have meat roasting in the upper oven and bread baking at the same time in the lower one.

Also both the Frigidaire and Electrolux talk about having an 1" space on the sides. I've seen posts from others about problems with this overhang. My space is exactly 30" and then on each side I have 7/8" to ends of the door/drawers that site next to the stove. Is this going to give me problems?

Finally, if I end up ordering over the internet, is this something I will be able to figure out how to install? My husband and I aren't particularly handy but I can follow directions well if they are clearly explained. So far I've only been able to find the Kenmore and GE in stores around here so if I chose one of the other options I won't be able to buy it locally.

Thanks to all,

Stephanie

Comments (5)

  • 15 years ago

    With my slide-in Eluctrolux induction range, I'm fine using pots ~1" larger (or smaller) diameter than the hob its on -- talking about bottom-flat diameter here, not the (normally used) top of the pan. A 12" canner should be OK on the 10" hob; I'm less sure about a 10.5" stock pot on the 8" hob, although they'll fit side by side together (my cooktop width is 28"). Others here are looser about matching pots to their induction hobs; how picky you need to be may depend some on a particular brand and its sensors, etc.

    Plan on having Clearance on either side of the front of my slide-in range was a problem, because E'lux didn't say they assumed US style face-frame cabinetry rather than the European style frameless cabinets I have. Although both my oven doors are just a touch wider than 30", the top ~2" part of the range, in line with the corian countertop, is 31.5" wide; this tapers down to the oven door. So, your 7/8" clearance will be fine unless the door/drawers get too close to the bottom of your countertop. [Again, I'm assuming the freestanding model is the same as my slide-in E'lux; it may not be.]

    In my experience, my range was trickier to install than it should have been: e.g., it's picky about placement of the electric outlet in the back wall, and I needed a (free) service call from the local dealer to level it. It would be great to have someone around who's installed this range before. Given that you may need to order these brands online rather than from a local dealer, you might want to feel especially confident you can return stuff and get installation help, if needed.

  • 15 years ago

    I also have the E'lux slide-in and agree with chac's measurements. Be sure to look at the installation diagram BEFORE your cabinetmaker designs the adjacent doors. Regarding the lower oven, I wouldn't count on doing much baking in it. The heating element is too close to the floor of the oven and things burn on the bottom quite quickly. It's OK for baking potatoes, reheating, warming, and things like that, but it's more trouble than it's worth to try cookies, pastry, etc.

  • 15 years ago

    CJ, you stated 'freestanding'. Elux now has a freestanding version of their induction oven. That thing they call a lower 'oven' is just a warming drawer with delusions of grandeur.

    The Elux has that drawer, which is wider than the GE. The GE has a warmer element on the cooking surface. The Elux has a single gliding rack and two other 'manual' racks. The GE has 3 'manual' racks.

    I THINK the GE is 6", 8", 8" and 10". The Elux is 6", 7", 8" and 10".

    The GE is pretty much all stainless. The Elux top (around the cooktop) is black porcelain.

    The GE is around $2800. The Elux is around $2900.

    When it comes to canning, you might think about getting one of those turkey fryer burners and do it outside. They're fairly cheap.

  • 15 years ago

    Installing a freestanding range is usually just sliding it in place. However, you need to make sure the outlet is located in the correct place. And you may need to put a new pigtail onto the range. If you know which end of a screwdriver to use, this should be no problem.

    Some ranges require 'tie-downs', little mechanical thingies that you screw into the wall or floor that the range slides into to hold the range in place when you open the door and put something heavy on a rack. Not a big install problem.

  • 15 years ago

    Thanks for the all help. It has helped me out immensely. It sounds like I won't be able to bake anything significant in the small oven.

    I've looked at the installation guides and my current outlet seems to be in an acceptable spot. As far as the cabinets go, I'm just replacing my current coil burner stove that is dying. I'm not reworking cabinets (nor have the budget to do so) so it must fit and function in the existing space.

    I've looked into a separate heat source for canning but I have a split level with a wooden deck right outside the kitchen. I don't feel comfortable cooking on anything directly on the deck so I would either have to run down the deck stairs to the cement at the bottom or run down the stairs in the front of the house to cook in the garage. Neither option is appealing to me.

    The prices I'm finding right now are about $300 difference between the GE and the Electrolux. I've narrowed it down to these 2 but now need to decided if I want the bigger burners on the GE or the second oven on the Electrolux.