Software
Houzz Logo Print
idsy

Any High End 30' Deep Refrigerators?

15 years ago

I was thinking of having a baking center with 30" counters on the wall next to the refrigerator, and was hoping to be able to make use of the full 30" depth by getting a deep refrigerator. So far, I've only been able to find 24" counter-depth models in high end refrigerators like Sub-Zero, Liebherr, and Thermador. Anyone know of any good brands out there that make a deeper model, preferably in a 48" width?

I am also willing to consider commercial refrigerators if they have residential service and possibly a removable compressor that could be placed in the basement to dampen the noise.

Thank you for your help!

Comments (27)

  • 15 years ago

    strictly speaking: nope

    commercial is an option, but off hand I don't know any at 30" AND it will be very difficult to secure service in your house if you need it. Talk to a commercial supply in your city BEFORE you think about this option. Remote compressor mout is an option with these.

  • 15 years ago

    That's disappointing to hear. It seems despite paying "custom" prices for many appliances I can't actually get anything like what I want.

  • 15 years ago

    $7-10k for a fridge is expensive for sure, but it's no where near "Custom" prices.

  • 15 years ago

    There are MANY fridges that are about 27" to 28" deep and require air space behind them.

    Is that OK?

  • 15 years ago

    How high end do you need? Samsung makes some very nice 29" deep units. They are cavernous inside. We have the RFG299AARS and we're very impressed with it.

    Not 48" wide, though. Gosh, 48x30? You're almost talking a restaurant reach-in. You could probably find one easily on a used equipment website or auction site.

    -Stooxie

  • 15 years ago

    The units you named are meant to be built in. That's why they come in cabinet depth only. If you're doing 30" deep counters you can put a shallower fridge in the space, and build out behind it. If you want deeper shelves, consider the SubZero with the glass in the door. It has full depth shelves, with no space given over to door baskets. The reason you can't find 30" deep built-ins is that there just isn't demand for them. More and more people are putting 30" deep counters in their kitchens, so there's a possibility that the market might catch up, but one of the things people like about shallower refrigerators is not losing stuff in the back. One of the features I love in my Miele all fridge is that the lower drawers run the full depth of the unit, and are good for putting platters in. I'd imagine the same would be true for Thermador, which uses the same body design.

    There's a lot of love for wider and shallower. Even in the high end, in technical goods like appliances, you still have to run with the herd a bit. If someone does make truly custom refrigerators they're surely orders of magnitude in price different from what's being offered commercially.

  • 15 years ago

    Antss, I'm not asking that fridge be built exactly to suit measurements as would be truly "custom". I would just like custom to mean more than, "We can glue a panel on the door that looks just like your cabinets." You know for one or two lines to offer a standard depth (instead of a counter depth) option is not really an unreasonable expectation at that price point, even if it's just a special order item you have to wait a little longer for. And, as the SubZero Pro 48 was one I looked at, it's more like $15,000 or more. It's expensive anyway you look at it, but particularly when you're not getting something even close to what you want.

    DavidDro 1, are the 28" depth fridges about 48" wide? If so, it's an improvement, so, yes, what are they?

    Stooxie, I went to a restaurant supply dealer today and I didn't get a price on a walk-in, but they said they be happy to do it, but it would cost a lot more than a commercial fridge that can be found in dimensions of about 50" wide and 30" deep. Besides, even a small walk-in would be much bigger than I want.

    Pllog, I realize that those are all built-in and I would be happy with a freestanding, but it seems to me that if you want a high quality residential fridge you have to pay for the aesthetic bells and whistles that go with it. I looked at the glass door SubZeros and the problem with those was that they didn't have any good organization for condiments and other small items then, so what was the advantage over a commercial for 1/3 of the price?

    I saw the Miele for the first time today and did note that the bottom two drawers were full depth, and this still left room for door storage. You're right, it was a slight improvement. I didn't note the same in the Thermador when I looked, but I might not have seen the right model.

    The counterdepth fridges don't actually work for some things. The dish I used to mix up fresh dog food for my dogs is 18" in diameter. A full sheet pan or sheet cake doesn't fit in models with door storage, etc. They definitely have a downside.

  • 15 years ago

    To answer if there are any 28" depth fridges about 48" wide, go web searching for 48" (or whatever will suit you) E.g. ajmadison or abt are good sites. Come back with other questions that need a forum.

    Just in case you need to be told, I'll tell you: in the left hand margin of the ajmadison site you can select dimensions to suit. And you can keep changing them. Hours of fun.

    "If so, it's an improvement, so, yes, what are they?" can be answered best when you have done your own homework first.

    Good luck.

  • 15 years ago

    Idsy,

    I just checked with an 18" pan--it's just too big for the drawer in the Miele. It would fit if you took out the drawer and used the space as a shelf. Not optimal. You said "diameter", however. Does that mean it's round? At the point that you're talking $5000-$15000 on a fridge, couldn't it also be time to spend a bit more and get a new, rectangular dish? The same volume would fit better in any of the models you're looking at if it were shaped more like they were?

    A full sheet pan might just fit inside the Miele in place of the drawer, but only just barely. A cake on a platter won't in either direction. The interior of the 30" unit is about 26".

    Next question...many, if not most, people have some form of secondary refrigeration. Do you have room for a fridge in a pantry or garage or something? If you can find an inexpensive, energy efficient model, you can use it for sheet cakes, temporary storage for bulk buying, party beverages, etc. You don't need the fancy features of the high end fridge for those things.

    But if your problem with the glass front SZ is really about organization you could fix that by using some organizers. They sell these in various sizes specifically for fridge organization. I think wire baskets might work better--I'd guess the clear plastic would get scratched and cloudy pretty easily, and might be hard to clean in the corners--but the features of these that work well are (1) clear--you can see what's in it without taking it out, (2) straight sided--a lot of baskets and bins are angle sided for stacking, which just makes your bottles fall over, (3) integrated handle to make it easy to pull out. You can put less frequently used sauces in their own bin behind, and the things that go on the table daily in front, and just have a side of one shelf that's for condiments, jam, etc.

  • 15 years ago

    Davidro, I'm sure I'm not the only one who has ever run into this problem, and these kinds of questions are exactly what a forum is for.

    As for the selection at AJMadison, there are no 48" wide, 30" depth refrigerators. For 48" wide and 28" depth I get 6 options, 3 of which are chest style and none of which I consider in the same league as the one's I originally mentioned.

    The Monogram and KitchenAid Architect IIs seem to both use single compressors. Both the Monogram and the KitchenAids still use a 24" cutout depth with the door sticking out past the counter accounting for the rest of the inches, which means they're not taking advantage of the extra depth I have available. And, when I saw them in the showrooms they did not have the same quality feel as the SubZero, Miele, and Thermador.

    Here is a link that might be useful: AJMadison

  • 15 years ago

    Plllog,

    Thanks for your thoughtful response. Your points are quite good and I have taken them into consideration throughout my search. I've used some of these workarounds in the past, and I may yet end up resorting to some of these again in the future.

    For the time being, I am still hopeful that I can find a refrigerator that better suits my needs, that I can either find an expensive fridge that has much of what I want and need (even if it has much of what I don't), or a superior functioning workhorse at a lower price that I won't begrudge having to resort to loads of inconvenient workarounds to get the amenities I want.

    Sometimes people on these forums come up with some pretty ingenious solutions.

  • 15 years ago

    alright, get two fridges.
    you have to know how much freezer capacity you will want.
    a 24" all-fridge and a 24" dual-compressor fridge-freezer might be a perfect combination.

    good luck.

  • 15 years ago

    Davidro1, a separate fridge and freezer were always on the table. That's how the Liebherr I mentioned in the first post does it. However, there are no 18" wide, 30" inch deep freezers that I can find. Summit seems to be the only 30" wide by 30" deep fridge and they are not high-end, only 66" tall, and are unpredictable. I didn't find any 24" wide by 30" deep fridges.

    I know it *seems* that because 30" is a standard depth for refrigerators and 48" a common width that I should easily be able to find this combo (as a whole or separates), but it's not so. This is why I started this thread. Although I have looked into many brands, I'm certainly no expert and am wondering if there aren't some specific brands or models that were overlooked in my own searches.

  • 15 years ago

    There will be models that declare themselves as 24" or 26" deep but that number doesn't include the door. Add that and you get 26" to 28" in real life. Add an air space behind the fridge and you have already managed to fill 30" depth, or some close number.

    So, there is no need to hunt for fridges that declare 30". In fact, one could simply go looking for any old fridge that is not truly counter depth. It will be easy to see that their handles protrude and the total with handles is more than 29.5". Close enough to make me optimistic. At ajmadison.com you will see "Depth without handles" Add two inches air space and an handle, and you will bring the numbers higher by 3" to 3.5" more. But it is possible that the "Depth without handles" number can be erroneous, even on the manufacturer's web site, and of course also on ajmadison.

    Find the appliances you like, without sticking to your 48" width criteria. Change that one. There is no single appliance 48" in width. If you feel you MUST must must fill 48" width, it will have to be with two 24" appliances. This is unfortunate for you. Put a big freezer somewhere else (outside the kitchen) and it lets you have a better floor plan in the kitchen.

    If you feel you MUST must must have something high-end, whatever that means to you, then you are boxing yourself in more and more, if it mens rejecting more and more companies. LG has a high-end bottom-mount fridge freezer that is GREATER than 30" in depth.

    To order a custom made fridge is easy. All you need is money. With a remote compressor, you put the noise somewhere else.

  • 15 years ago

    If you start looking at the counter depth models (26"-29"), do check the interiors carefully for your 18" pans and full sheet cakes. A lot of them have wider door trays but not deeper shelves.

  • 15 years ago

    "More and more people are putting 30" deep counters in their kitchens, so there's a possibility that the market might catch up, "

    Where is this happening? Don't bet on the built in makers offering a 30" deep fridge anytime soon., they have a hard enough time now selling what they produce now, let alone design a new platform and spend $$$ of tooling and production line changes.

  • 15 years ago

    Oh, Antss, I didn't mean any time SOON! As you pointed out, markets are notoriously slow. But they do respond, and if enough people demand something, someone will see a buck to be made and provide it. It was a general statement about market economics, not an encouragement to wait for it to happen!

  • 15 years ago

    This thread is a red herring. People who want lots of refrigeration and freezing capacity don't have all their fridges and freezers in the kitchen. People with the money and desire for high-end only don't limit themselves to 48" width in the kitchen. The OP has asked for 48" or less, all in one device. The OP does not know how much of that volume is to be freezer, how much is fridge. It's an idle wish to have something. There is no market for a device of that size.

    Here is a link that might be useful: Silent Fridge-Freezer with well regulated temperatures

  • 15 years ago

    Idsy - with respect you actually said:

    "preferably in a 48" width" which , given your other strict parameters means 48". How are we to extrapolate that 52" would be OK for you but 72" is not ???

    Re: the cites, one makes no mention of 30" deep built ins, only some folks think "counter depth " units are too shallow - not the same thing. The GW thread is basically one other poster that would like a "built - in " at 30" - so it's two out of a thousand posters here that would like such a product - not a ground swell - which brings me to another point.

    30" deep counters are not going to catch on - it's bad ergonomically for 99+ % of the population. Basketball players , sure. The rest of us, no. In addition, do you think you have eureaka'd onto something that professional designers haven't thought about or tried in the last 30 years ??? If there was even the slimmest VIABLE market for this product, one of the big manuf. would roll one out, the boys in marketing would be salivating at of prospect of having the first, and only, and newest, great thing in refrigeration.

    Look I get it, this is America and we've grown accustomed to having access to anything we can dream up - so you should not quash your desire or imagination for this product or something else that might tickle your fancy.

    But.........................don't get surly because a co. doesn't jump on your latest "great idea" and produce a relatively affordable version. If you really want it someone will produce you a one off, and if you really think it has traction and will fill an untapped need you can start a business and produce them yourself and you'll sell tons of em as well as getting a free one for yourself.

  • 15 years ago

    I don't know why this thread has caused such hostility. It certainly didn't start with me. I tried to ignore the first few digs, but they just get worse.

    Anyway, as no one seems to actually be able to answer the original question, I'm out. Talk amongst yourselves, or don't. Whatever.

  • 15 years ago

    Hey Antss--I'm 5'1" and can't beat my 8 year old neighbor at basketball, but I love my 30" deep counters!

    I'm having trouble giving up my low end fridge though--I can't reach stuff at the top of the high end ones. They're very tall. :P

  • 15 years ago

    Maybe you can mount one of those running boards that extend automatically when you open the door!

  • 15 years ago

    idsy - I don't think anyone is being hostile, and some take my blunt tell it like it is style the wrong way. I do think you are being a bit obtuse in this case.

    Your question was answered: "strictly speaking: nope "

    Just because you/others don't like or agree with the answer, doesn't make it less accurate. No one makes a 30" deep built in for residential use.

    Re: the 30" counters - a few people do not make a groundswell, they are not going to come into favor anymore than 38-40" tall counters are going to become mainstream. A few people like 8" tall toekicks too, but they are not going replace the the 4" size as standard here in the U.S. anytime soon if at all.

    Guys/gals - I respect your taste and choice, but that doesn't mean it's going to catch on with the masses.

  • 15 years ago

    Hi Idsy,

    First off, I don't think your wishes are unreasonable. I personally have considered the same thing. I can say that I have found absolutely nothing in the residential arena over the last five years. The only reasonable possibility is a commercial unit.

    Try looking at True as an example (www.truemfg.com). They're popular commercially and are reasonably priced. Unlike stoves and other fire breathing appliances, refrigerators aren't nearly as controversial when it comes to meeting local codes.

    True actually has dual temperature units that are close to the dimensions you asked for, like the T-49DT.

    Good luck.

  • 15 years ago

    Thanks, jscout! At first glance, that model looks like a viable option. I'll look into it further.

  • 15 years ago

    If it doesnt work out for you and you find you are left with a gap behind the fridge.... it seems like a great place to build a hidden cabinet to stash a large cutting board of trays.

Sponsored
Kuhns Contracting, Inc.
Average rating: 5 out of 5 stars26 Reviews
Central Ohio's Trusted Home Remodeler Specializing in Kitchens & Baths