Software
Houzz Logo Print
ginny20

Induction cooking across burners

15 years ago

Has anyone with an induction cooktop actually tried to cook across two burners that do not have a bridge (as only the LG has)? I currently do this on my coil cooktop from time to time with a long fish poacher, a grill pan, or sometimes when making gravy in a roasting pan. I've read threads with guesses about whether this will work, but has anyone done it? Thanks!

Comments (12)

  • 15 years ago

    I have crossed burners to make gravy with no apparent ill effect.

  • 15 years ago

    I have too, for gravy. It worked okay but not great, but part of that I'm sure is due to me using a Graniteware roaster which doesn't have a flat bottom. I usually just use the large burner instead. (One burner would be fine for cast iron if you're willing to let it warm up.)

  • 15 years ago

    I've put my Graniteware roaster on my 11" element and it worked fine, bumps and all. Most of it fits within the ring, just the pointy ends overlap. I think that's better than trying to bridge with it.

    My long grill pan will work across two elements, but the problem, besides hot spots, is that the heat builds up underneath. This can affect the electronics, and otherwise upset the unit. If you're lucky, it'll turn itself off if it's too unhappy. You can help by opening the drawer or doors underneath to increase air circulation and cooling, unless you've mounted it over an oven, of course.

    There should be no problem deglazing a roaster across two elements. It doesn't take a lot of heat for a long time. I'd worry about the heat distribution in the fish poacher. Might be better to do that in the oven. The grill pan worries me. If you have a large element, you can get a large round, flat bottomed grill pan, which would work better. (I have gas as well, so use that with the grill pan.)

  • 15 years ago

    Thanks to all for your feedback. I'm excited about getting induction, but I want to minimize the surprises.

  • 15 years ago

    The poacher wouldn't bother me so much since it should not be that hot.

    Of course, that new Gaggeneau can do this by design... (sigh)

  • 15 years ago

    Weedmeister - Gaggenau? What Gaggenau?! (she said, getting excited) I only knew about the LG having a bridge. Gaggenau isn't easily available around here, but it would be another option. I didn't see one with a bridge on the Gaggenau website just now - but that often happens with new products. Where did you see it? Or is it way to expensive to even look at?

    With how long this project is taking to plan, there may be zone-free induction available by the time I'm ready to purchase.

  • 15 years ago

    I believe Wolf also has a bridge.

  • 15 years ago

    Gagg has a video of a new zoneless top that senses the size, shape and position of the pan. It uses smaller 2" inductor units, a few dozen around the cooktop. If the pan covers a unit, the computer links it and any others to a single control for that pan. It displays the shape of the pan on its screen with a number for that pan. Move the pan around on the surface and the computer knows and activates the correct inductor units. I'm not sure what the upper limit on the number of pans, but I guess that as long as they can all share the surface the computer will allow it. Or just one large pan. You can set power levels and timers for each pan separately. The control screen looks something like an iPad, but monochrome.

  • 15 years ago

    I believe the Gagg is restricted to 4 pots, which is a footnote in the manual.

    However, Bosch, Neff, and Siemens all offer a flexInduction, which allows you to cram as many pots and pan on the cooktop as will fit (but take care not to blow out the electronics.) Naturally, none of these are available in North America. Youtube has some incredible company videos showing how this works.

    I didn't think Wolf offered a bridge, I looked into it and the bridge element was only on their ordinary electric cooktop.

  • 15 years ago

    I'm going to go check if the Gagg zoneless is available in North America, or if not, when, and the price (which may make the whole issue moot, anyway). Thanks so much for the tip! If I get any info, I'll enter it on this thread for future seekers.

  • 15 years ago

    Is the AEG with full-width burners still available in the US?

  • 15 years ago

    Was AEG available in the US? The threads I've read talk about importing from Canada. Actually, I live two hours from Canada, so that might not be such an issue.

    Gaggenau zoneless is not available in the US or Canada. Sigh. I probably couldn't afford it anyway.