Software
Houzz Logo Print
skagit_goat_man_

Rain Gutter Features

19 years ago

Not an exciting topic but what features do you look for in your rain gutter system?

Tom

Comments (8)

  • 19 years ago

    Under the learned the hard way lesson...make sure your gutters can handle the run off. We have a tile roof, the water FLOWS off these babies, so much to that at times is just overshoots the gutters. Make sure there are adequate downspouts. Somewhere in the process ours was not designed well with probably 25-30% of the roof draining into one downspout. Apparently while the house was under construction and the water was draining into the lot, it wasn't really noticed. Now that we have the pool and landscaping we darn near flooded on Monday. The landscaper and gutter guys are coming out today to figure out ways to add more downspouts and fix the problem. Wish it had been noticed before all the landscaping was done, but our builder is doing a great job getting it all taken care of quickly. Biggest advice is watch how the water runs off during a good rain and plan accordingly.

    Is your name an indicator of location? Skagit County in WA state? Beautiful part of the country.

  • 19 years ago

    If you have the potential of tree fallout hitting your roof you might want to consider "gutter covers". Different technology works better for different type of fallout (i.e. leaves vs. pine needles). I have had bad luck with the stuff that looks like a coarse black screen. The "gutter helmet" type seems to work well for leaves. The fine stainless screen works for pine needles.

  • 19 years ago

    Let's see. I look for it to handle the water adequately and not to ever require cleaning out again (so DH stays off ladders). And I look for a really good manufacturer with deep pockets so if I need to sue him there's something to go after (also inspires better workmanship in a company if they make enough money to worry about product liability). And for an installation company that has a great reputation, borne out by a number of people I know well who have had the system a good while and it still works right.

    So, around here there's only one choice: Englert LeafGuard. Our builder will have them installed on our new house. They manufacture and install their own system and don't sell their product to anybody else.

    Oh, and due to years of frustration over this one unglamorous but potentially exasperating matter, it is one of supreme interest to me. (Though boring.)

  • 19 years ago

    Regarding gutter helmets -- we are having the same problem as mcbird. Our enormous roof is causing trouble for our gutters to handle the water load. The gutter helmets are making the problem worse because the water just shoots over the top of the guards like an Olympic ski jumper. It doesn't happen in a nice gentle rain -- the guards do what they are supposed to and lets the water fall over the top of the helmet into the gutter. However in a hard rain (which is most often what we get in the summer), the water pours over the helmets right into my landscaping and making the mulch go all over the place.

    My builder is going to call our the gutter company to come up with a solution. It may be to eliminate the gutter helmets in a couple of places where the roof valleys meet and/or install some larger gutters to handle the volume of water.

  • 19 years ago

    Mcbird, yes we're in the upper Skagit Valley but are building about 80 miles away on Whidbey Island.

    I don't think leaves on the roof will be a problem but lots of conifer tree debris. Does one style of these gutter guard products work better on non-leaf debris? How expensive do these systems get?
    Tom

  • 19 years ago

    Make sure you go with a good mfgr. with really deep pockets so you can sue them,tom. Unreal!

  • 19 years ago

    sierraeast, can you expand a bit on your comment? Tom

  • 19 years ago

    I was just quoting pink toes response above where that was stated. In a sense i understand that attitude, but certainly wouldn't be a factor in seeking out any product.I think any reputable mfgr.is going to stand by a product if they want to stay afloat without having to worry about any consumer suing them if it's a defective product.If it's a tried and true product before it's released into the mainstream,then the chances of failure are lesser than a product released w/o testing, which most wouldn't gamble on.