New, Larger Sharp MW Drawer Question!!

beemer1981

17 years ago

Sharp announced some months back a 1.2 cu ft version of its MW drawer that's about 1" or so deeper than the version that's been sold over the past several years ("fits a 7" mug or 20 oz. cup"). The smaller, older version is also OEM'd as Dacor, Wolf and Viking model.

The older version vents to the front. I've been unable to see how the new unit vents, as no dealer seems to have them on display! I've read some comments elsewhere that the new drawer MW vents into the cabinet below creating a potential moisture issue.

Sharp finally posted some pictures of the newer unit's venting system on its web site.

KB-6524 (24" model) showing the vents:

Here's the KB-6525 (30" model) showing the full front panel and how it covers the vents:

Here's the older model showing the vents along the front, with the door stopping above them (no obstructions):

Does anyone have or has anyone seen the newer, deeper model? Does it vent adequately to the front or do the vents direct the exhaust into or over the cabinet below? We're interested in the larger, deeper unit, but don't want to buy something that could damage our cabinets over time.

Sort by:Oldest

Comments (8)

southernstitcher
17 years ago
Very interesting question, as I'm about to hit the button to order mine! I certainly don't want a problem on my new cabinets - we use our MW a lot.
I really want the larger height in there too. Looks to me like there is nowhere else for the steam to go but out toward the front of the unit, and then down, no matter where the vents are pointing.
Have you called Sharp?
beemer1981
Original Author
17 years ago
I emailed Sharp, no reply. One of the local appliance dealers called the rep, who simply stated that there would be no problems, it was properly designed. Big surprise there! When I suggested that the dealer ask for a letter that Sharp would replace my cabinets if they got damaged from the microwave, we both shared a good laugh.

It looks like it could be an issue, so we're reluctant to take the plunge. Hopefully someone here on GW will be able to answer my questions.
Related Professionals
Tallahassee Kitchen & Bathroom Designers · Madison Kitchen & Bathroom Designers · Tyler Kitchen & Bathroom Designers · Chicago Kitchen & Bathroom Designers · Aberdeen Kitchen & Bathroom Designers · Kahului Kitchen & Bathroom Designers · London Kitchen & Bathroom Designers · Lagrange Kitchen & Bathroom Designers · Hays Bathroom Remodelers · Westminster Bathroom Remodelers · Ardmore Bathroom Remodelers · Texarkana Bathroom Remodelers · Newark Bathroom Remodelers · Potsdam Bathroom Remodelers · Hudson Kitchen Remodelers
beemer1981
Original Author
17 years ago
Anybody?
Buehl
17 years ago
I would post this on Kitchens as well. I remember a couple of people talking about getting it, but I don't remember who... Unfortunately, I cannot help since I have the older model.
southernstitcher
17 years ago
Well I went ahead and ordered mine. I really need the extra height for a large glass measuring cup I use frequently. Maybe it's so energy efficient or insulated it does not generate enough outside heat to be a problem?
beemer1981
Original Author
17 years ago
The extra height is what's keeping my interest in it as well. I cross posted this on the Kitchen Forum, and you might follow that thread as well.

Once you have it installed, if possible please post some pictures and observations.

Here is a link that might be useful: Sharp Drawer Post on Kitchen Forum
beemer1981
Original Author
17 years ago
Bumping this one to the top as a reminder in case there are any updates.
southernstitcher
17 years ago
Bump. Mine should be in this week. Friday will be two weeks since I ordered it from Abes. No call yet from the freight carrier... If it does come in this week, it'll still be about 3 weeks till install.
I will post pictures and observations once it's all in.