Garage Storage Gurus: 24', 30', or 36' workbench depth????

18 years ago

What say ye?

I am putting a perimeter storage/table/work bench in the garage. It will probably be about 30 feet when I am done. Basically I have a lot of bare wall and I wanted to add storage.

What is the proper depth? I know kitchen counters are 24" deep but this seems to small, however I still want to be able to reach things on the wall.

24" is a good size for lumber since I can get 2 tops out of a 4'x8' sheet of plywood. 36" may be too big and a lot of reaching.

What do you have in your garage?

Sort by:Oldest

Comments (3)

happy123
Original Author
18 years ago
Meant to say INCHES not FEET in the thread subject :-)
davidandkasie
18 years ago
my workbench is 36", and it is a hassle at times to reach tools hanging onthe back wall. originally it was a workbench at our office and had a shelf on the back which is why it is so deep. i have a 24"x6' table in the workshop and it is too narrow for many things. i got my wife a storage cabinet for the laundry room that has a 30" top on it, and it seems just about right to me.

if you have a couple saw horse that can approximate the finished height, lay a 4x8 sheet of plwood on them. have soemone hold a board at each mark and see what it feels like to you. if you are like me, the 30" will be just right. then use the 18" left over to make shelves or doors for it!
Related Professionals
Rome Accessory Dwelling Units · Oklahoma City Accessory Dwelling Units · Wilmington Home Additions · Greensboro Home Additions · Parkersburg Home Additions · San Jose Home Additions · Carlsbad Home Additions · Vincennes Carpenters · Hilton Head Island Carpenters · Lansing Carpenters · Brainerd Carpenters · Jamestown Carpenters · Rochester Carpenters · Lancaster Carpenters · Lagrange Carpenters
heimert
18 years ago
Why not do some of each? It will be nice to have a deep counter for some projects, but also useful to have shorter tops elsewhere. You can store less used things on the deeper counter.

Depending on layout you might, for example, put the deeper part on the short leg of an "L", or put it at one end or in the middle.