Did the second remote quit working after you tried to program the first one? Try programming them again and try before programming the second one.

The feature of having the motor unit light bulbs come on automatically when you walk into the garage is a feature that has only been on the market a relatively short time. Not all machines have this capability built into the logic board.

If your machine has this capability the only way you can turn it on or off is with a "three function wall switch." This means that in addition to a button that opens and closes the door there are two other buttons on the same wall switch. One is marked LIGHT and the other is marked LOCK.

To turn the feature on turn the lights on manually with the wall switch then press and hold the LIGHT button for about 10 seconds until the motor unit light bulbs flash.

Now if the light bulbs are on, manually turn them off and then walk out through the open door. The light bulbs should come on.

To disable this feature, start with the light bulbs OFF and everything else is the same.