Software
Houzz Logo Print
ctrl_z

All I think I really need is a basic dryer but...

18 years ago

Current dryer is over 20 years old and it's still OK but I want to use that one in another location and buy a new replacement. But its been a frustrating experience shopping for a basic replacement dryer that has these two simple features; a dryer rack and side venting. Oh, and good capacity of at least 6 cu. ft. I don't care much about matching the washing machine (an almost 20 year old Kenmore that still runs perfectly) other than it has to be white.

It's been sufficiently frustrating that I am considering replacing both washer and dryer with a modern front load design. Currently there's a good sale on a Daewoo laundry pair available at Future Shop in Canada that has all the features I'd like. But this appears to be a VERY unknown brand and would likely require a purchase of additional warranty.

Some questions I have;

It sounds like FL washers (and maybe the matching dryers) require greater care in usage and likely won't last anywhere near 20 years. And I probably don't really need a new washer yet. Are the extra features worth the cost and hassle of relearning laudry methodology? What extra capacity can I expect from a 3.8 cu. ft. front loader vs. a "full size" top loader?

Any recommendations as to a basic dryer with rack and side venting?

Anyone have any comments regarding the likely quality of a Daewoo washer/dryer?

Thanks!

Comments (3)

  • 18 years ago

    there aren't any new washers or dryers, FL or TL, that will last 20 years anymore. they are purposely made to self destruct or some such thing in about 7-8 years. seriously! it's really awful.

    I love my new FL Whirlpool dryer. it's the top of the WP line, the new 9600 series steam dryer, and it has lots of super handy features, such as damp dry, a fast steam dry to get wrinkles out of already clean and dry clothes and to refresh something you've worn once. I love it. and it's 7.4 cubic feet. it hold EVERYTHING and more. my FL washer is 4.0 cubic feet and it seems to hold lots more than my old 3.8 cubic feet TL. don't know why, but it does. something about that lack of an agitator.

  • 18 years ago

    there aren't any new washers or dryers, FL or TL, that will last 20 years anymore. they are purposely made to self destruct or some such thing in about 7-8 years. seriously! it's really awful.IMO, that's an exaggeration, although "robustness" isn't what it used to be.

    The Whirlpool washer my parents bought new in January 1962 was replaced in June 1976 (14.5 years), and had numerous repairs, including replacement of the bearings TWICE. The Whirlpool replacement ran for 18 years, with *fewer* repairs, and the bearings *never* changed. The KitchenAid that came next in 1994 has had two repairs thus far, neither one considered major ... we also recently replaced the pump (which had not yet failed but was getting iffy), and did some rust-treatment on the cabinet. I realize these examples are not quite equivalent to a new machine bought today, but it perhaps illustrates that newer machines (as compared to "older" ones) don't necessarily equal more trouble. I have a Fisher & Paykel GWL08 bought in 1999 (8 years old now) that's still going strong with no repairs needed.

  • 18 years ago

    my maytag tp washer started having problems at three years and completely clunked out this summer, after just six years of use. purchased it new in 2001.

    the salesguy at the store told us to be careful and not spend too much on a fridge because they only last about 10 years max now. he said that no appliance is made to last longer than that anymore. and since he was downselling, trying to get us to spend less rather than more, what was he to gain by lying?

Sponsored
Snider & Metcalf Interior Design, LTD
Average rating: 5 out of 5 stars25 Reviews
Leading Interior Designers in Columbus, Ohio & Ponte Vedra, Florida