Software
Houzz Logo Print
trlyza

LG Dryer DLG7188RM question

19 years ago

Hi there,

I posted in the gallery. Not sure if it was the right section to post?...anyway...

I'm new to this forum and was hoping I can get some guidance on the dryer I purchased a few months ago.

First....Just a little story as to why you never leave your dryer running if you aren't home....When we bought our condo, it had the original washer & dryer which was probably about 18 yrs old. I was waiting for the day one or the other would break down. The dryer drum would only turn off when you manually turned it to 'OFF', otherwise the drum was always on even if the door was open. The button to tell it to go off when the door was open was broken. Not very safe, I know, but I got used to it and got quite good at grabbing the spinning clothes if I didn't feel like turing it off. One day I am taking a load out of the dryer and right after it was empty I was putting in a load of sheets to dry... As I go to leave the room, I notice the dryer starts smoking from underneath. At first I wasn't sure what I was seeing. I then realize it's the dryer, so I quickly turn it off. I see a little more smoke before it subsides. Surely it could of lead to a fire if I wasn't standing there to stop it. Please be careful if you have an older dryer becuase these things really DO happen....

This was my excuse to get my very first new appliance ever. I felt like a kid in a candy shop. I ended up getting the LG Cherry Red Model# DLG7188RM. I had ordered a T/L dryer, Kennmore I think, but canceled it after re measuring the width of our space. The new dryer wouldn't fit with the matching washer which I would be getting after our wedding. Wedding came and went and the matching washer is coming tomorrow (LG model# WM2487HRM)

Anyone have this dryer? I am having trouble drying certain items. I have a honeycomb design blanket. I put it in on the Heavy Duty selection and I increase the dry time to the max. The dryer will turn off before it's even half dry. I turn it on again and it does the same thing with quitting before it's dry. Am I doing something wrong with how I am selecting the setting or is something else wrong? This happens with other items too, but it's more apparent with the heavier items. I am beginning to wonder if the sensor isn't working, or is it user error....?

I appreciate any help with this. Thanks

Comments (15)

  • 19 years ago

    I do have this dryer and it has been a breeze. Every now and then w/the sensor dry if I wash a load of towels some of the bigger beach towels may not be "bone dry" as I am accustomed. (dryer balls have helped significantly)
    Is the dryer vented properly? Lint filter clean? Is the dryer flush with the back wall (a no no)? How big is the blanket? How do the clothes fare when you wash a normal load i.e. jeans, shirts etc? You could have a faulty heating element or sensor if everthing else is in place. I would get it checked out as soon as possible.
    I assume you are still using a tl, so your drying time will be long being that the spin is so slow, leaving clothes very damp comparatively. They still should be drying though.

  • 19 years ago

    I think the newer dryers tend to not over dry as much as the older machines. Over the last several months, I had both a Miele T9800 and Kenmore HE5t matching dryer.

    In general, both did not over dry clothes, but were adequate. But I did noticed on very heavy cotton things like bathroom rugs, they shut off before the items were fully dry. It seems to be because the senor only reads the surface dryness. A honeycomb pattern would seem to have the same issue.

    I guess the older dryers just ran longer and I did not really noticed it. But both the Miele and Kenmore performed about the same on measuring dryness and leaving a few item very slightly damp.

    And these were pretty different designs- the Miele had the senor in the paddle and the Kenmore, the more typical, near the lint vent sidewall.

  • 19 years ago

    luvmylg,

    What cycle do you use to dry heavier items? The dryer is fairly new, so I don't think there is lint build up unless there is blockage in the pipe going outside. There is a hard aluminum pipe from the dryer to the outside vent and it's not too close to the wall. I guess it's possible that the pipe going outside has blockage. Maybe I will call a vent cleaner to come do the entire pipe. The lint filter gets cleaned after every load. The blanket is a queen size and I would say it's a fairly heavy cotton. Regular clothes do better, but I still find them to be damp when the dryer decides to stop. You could be right about clothes being extra wet since I still used the old TL washer, but shouldn't the sensor notice this? I am now going to read the manual on my new washer. I may not get to doing a load until tomorrow, so I will report back on the drying results. Thanks for the feedback.

  • 19 years ago

    crooks101,

    I think your assumption is probably correct with old vs. new, however the blanket is still too wet to call damp. I would say it is almost half dry when I check it after the dryer stops, so I think this is way off what the dryer should sense. I'll have to experiment some more, perhaps try timed drying. I may call LG and see if they can give any advice. I hope it's not too late to get the extended warranty. I opted not to get it to save money, but now I may reconsider. Thanks

  • 19 years ago

    trlyza
    I dry on normal (medium heat, normal dry) for most loads. I am tall (6'4") so I don't like skimpy towels. My wife buys high quality dense/heavy beach towels for us and guest and a few normal size ones for our 7yo. For those I use the Cotton/Towel (medium high heat, normal dry) cycle. One thing that has made a difference and not necessarily w/softening is the dryer balls. Contrary to what I have read, they dont make the clothes (at least my clothes) softer or cut down dramatically on drying time, but ever since I started using them I have noticed that my clothes are dryer once a cycle completes.
    I need to make a correction too...I have the DLE7177RM which is the electric model...you have the gas model. I have never had anything come out of the dryer "half wet". At worst there would be a large load that was dry and there would be maybe one or two items that are still damp. (true damp)
    I would get that checked out ASAP.

  • 19 years ago

    HI,
    I would second the suggestion on cleaning out your dryer ventilation. I just replaced our 16 year old dryer with the LG 7177 model and before installation I cleaned vent from laundry room all the way outside, WOW was there a lot of lint buildup! My drying time was cut from 60+ minutes to around 40 minutes. Clothes are always dry. I have only used normal auto setting so far.

  • 18 years ago

    Just installed new DLG7188WM today!

    My 6 year old 'Estate' dryer was supposed to have a 'shelf life' of 10-12 before repair or death...5.5 years into it - gas coil problems. Called repair ($80 just to find my address...of course would be credited to repair IF we decide his dx is correct and use him) and without even taking machine apart said, "Yup, gas coil blew. Gonna need a replacement." $175 (plus the 4 twenties he already pocketed) was the verdict. Machine cost us $500 - delivered, installed & old one hauled!

    A major repair at least 5 years sooner than originally rated seemed like throwing good money after bad.

    Tons of research later...we stumbled upon NINOSTRADING.COM (hope that doesn't make them raise their prices, may need a washer soon!) where they specialize in factory direct 'Dings & Dents.' Paid $340 for $1,200 dryer + $170 for cross country shipping. Husband installed in under one hour. $520 for top rated and full featured, 1-year factory warranteed, brand new machine? Easy choice. So far, so good...very thankful for this site and these threads to share tips. Still have old washer, so I will make sure to use HIGH SPIN to remove as much water possible before using new LG dryer.

    CAVEAT EMPTOR: This is NO FRILLS, AS-IS, and as available type of site. Excellent, courteous and prompt - but cannot be picky about appearance or minor 'fixes' you must make. Order by 'pallet number' and they state general appearance. 72 hour return. Not for the weak (or picky) hearted...but who can't use a little extra mortgage cash these days?!

  • 18 years ago

    dryer gas valve coils, common problem, easy fix $19

    click on picture

    Do-It-Yourself Appliance Repair Help

    Thanks for the info on scratch & dent website...
    We bought our LG WM2688 Washer NIB from an LG dealer on eBay for $1200 + $100 shipping.

    We bought the LG DLG8388 gas dryer & (2) pedestals from a scratch & dent seller on eBay (cheap), although the dryer didn't come with any warranty because it no longer had a serial number, but no problem. Dryers are easy to fix and LG parts and service manuals are available on-line.

    LG service manuals

    http://www.searspartsdirect.com/partsdirect/index.action

    http://www.repairclinic.com/

  • 17 years ago

    I have a problem where it heats up, flames on, and then after the flame is off, and the dryer is still tumbling, a strong surge of natural gas comes out... I had the valve assembly replaced, the flame sensor replaced, and the igniter replaced... what else should I look for? Seems like the controller is keeping Valve 2 open??

  • 17 years ago

    check the Gas Valve info and tests

    NOTE: the Gas Valves are 90v DC

    LG DLG7188 Service Manual

  • 17 years ago

    Hi thanks!

    I bought a new ignitier and noticed that the old ignitor took longer to glow up while the gas was pumping out... the ignitor starts up quicker (tested resistance of old: 400 ohms, new: 100ohms)

    I still smell intermittent gas.. but after it flames up it's gone.. is this normal? or should I not smell any gas at all.

    I think I may have a sensitive nose...i had other folks stick around to see if they could smell it and i noticed the smell about 20 secs before any of them could sense something faint.

    Regardless if i open up the dryer in the middle between the heating cycles I can smell natural gas in the tumbler... I'll check otu the valves voltage; could you give me tips on how to go about doing that...

    should I be testing voltage when the thing is fired up at Valve 2?

    I may just complain and get a new control unit (but I dont see anywhere in the service manuals to diagnose if the controller is at fault)

  • 17 years ago

    sorry, if you don't know how to test the voltage, best to leave it to a profesional.

    You could check someone else's dryer to see it "smells" the same.

  • 17 years ago

    Just had the technician come in... he's having a gas valve assembly ordered again.

    He is hard bent to believe the gas assembly is faulty even though a new replacement was just installed in attempt to resolve the gas smell.

    We diagnosed the following:
    1. Dryer starts up
    2. Igniter glows
    3. "click" of the gas valve opens up and ignites

    when flame is off, about 8-10 seconds later we hear the "click" either the valve just closed, or is opening again...

    at this time natural gas is spewing into the tumbler...

    about another 5 seconds the dryer flames up...

    No gas smell during this time (since it's burning)

    after flame is off...
    about 18 seconds later I hear "click" either valve is open or closing.

    I believe it is a controller issue, but haven't been able to convince anyone yet.. sears/lg/service guy thinks it is still assembly, has anyone experienced such a strange case?

  • 17 years ago

    When I dry king size comforters, they take 3-4 cyckles on medium to medium hight.So about 3 hours. I have to take it out and re stuff it in so the middle gets dry. My normal loads take 45-60 minutes, depends on the load.
    I use low to medium spin cycle on comforters, don't want to put too much stress on the washer b/c comforters are heavy so the drying takes long time.
    Full load of towels takes up to 80 minutes to dry.
    Got LG too, different model.

  • 17 years ago

    I don't see why spinning a comforter at maximum spin speed would overstress the washer. It might save you a lot of drying time.

    The Comforters cycle on my Miele only goes up to High Spin (1200 RPM). After that cycle finishes, I move the comforter around and do a Drain/Spin at Max Spin (1400 RPM). The benefit isn't just from the somewhat faster spin, it's also from moving the comforter around. Unlike normal loads, comforters don't end up entirely pressed against the outside of the drum, and the part toward the center doesn't get as much centrifugal force. On the second spin, hopefully the part that was in the center is now toward the outside, and gets more water spun out.

Sponsored
Bella Casa LLC
Average rating: 5 out of 5 stars17 Reviews
The Leading Interior Design Studio in Franklin County