Recessed Light for Tight Space

13 years ago

We are remodeling our kitchen and in need of some advice for a recessed light that I need to squeeze between some relocated ductwork and plumbing. The location is above the dishwasher in the image below.

The space I have to work with is only about 5" deep and 4" wide. Prefer to use LED. My thought is what ever size light I use at this location I would carry the same around the counter space and possible use a large diameter recessed light along opposite refrigerator and pantry wall.

Some things I have been looking at are Juno mini recessed lights (however not sure if enough light will be provided)

Juno Mini LED Downlight

or or possibly getting a remodeler Frame that maybe can be installed inline between the ductwork and the joist. Something like Lytecaster 3-3/4"

Lytecaster Remodeler Frame-In Kit

Any thoughts are appreciated. Thanks.

Sort by:Oldest

Comments (4)

jirpel
Original Author
13 years ago
Here is a picture of the location I am refering to. The light needs to go in the space to the right of the duct.

Thanks

This post was edited by jirpel on Fri, Jun 14, 13 at 16:11
David
13 years ago
Would losing some height be possible- ~ 1/2 to 3/4"? If so, you could use h99 type housing along with a light such as the Cree cr4.
Related Professionals
Palm Bay Interior Designers & Decorators · Waycross Interior Designers & Decorators · Waco Interior Designers & Decorators · Sioux City Interior Designers & Decorators · Grand Island Interior Designers & Decorators · Saint George Interior Designers & Decorators · Terre Haute Furniture & Accessories · Texarkana Furniture & Accessories · Lewiston Furniture & Accessories · San Diego Furniture & Accessories · Mobile Kitchen & Bathroom Designers · Middletown Kitchen & Bathroom Designers · Galveston Kitchen & Bathroom Designers · San Angelo Kitchen & Bathroom Designers · Seattle Kitchen & Bathroom Designers
jirpel
Original Author
13 years ago
I think that is a posibility and the route I am steering towards. Can you tell me what is the differance betwwen the Cree cr4 type lights vs and LED bulb (where you would have to buy the trim seperate)?
David
13 years ago
Did you take a look at the recessed led guide?

The 3 important differences are
1. Lamps like the cr4 were built to be used as recessed lighting. There is better thermal management- the heat sink is properly sized, there is protective circuitry to protect the lamp when the temp becomes too high.

2. Different color LEDs are used and the light is mixed. The output is that emitted from the mixing chamber and will be at least comparable to the bulb in a can.

3. The dimming performance is generally superior.