Software
Houzz Logo Print
beachmom42_gw

Sink recommendation??

15 years ago

I need to pick out a new sink before the granite guy comes and not sure what to get? Know I want stainless double sink, probably equal size for both bowls. Have looked at $500 and up and others around $200 but just not sure what is most important? Any tips or suggestions on a particular brand or what to look for? Do I need to be spending that much on a sink??

Comments (9)

  • 15 years ago

    Do some searches on the bottom of this page--loads of threads re: sinks. Basically if you want SS, the lower the gauge, the thicker the SS. So, 16 gauge is thicker (and therefore quieter, I think more dent-resistant, and usually more desirable) than 18 gauge, though there are people here with 18 g who are quite happy with their sinks.

    You have to decide which size(s), features, style suits your needs, both for form and for function. We chose a single bowl, 0-radius corner (90-degree angle corners), 16 g Julien sink. When we purchased ours, Julien had recently brought its prices down to be more competitive with the Blanco sinks. We'd heard/read about Blanco, had never heard about nor seen Julien before seeing it where we made our purchase. But, we saw it, liked it a lot (seemed very sturdy and well-made) and are still very happy with it.

    Some brand names popular here are Ticor, Artisan, Kohler, Elkay, Julien, Blanco, Kraus, and a bunch of others.

    Good luck with your search!

  • 15 years ago

    We just purchased a 16 ga. Kraus 30" single bowl stainless undermount sink and had it installed in our granite countertop. It was less than $250 and is a very nice sink - no regrets here. The sinks available locally cost just as much or more and were 18 ga.

  • 15 years ago

    Thanks for the info! I will check those out!!

  • 15 years ago

    Another rec for the Kraus sinks (check out overstock.com and expressdecor.com). Also check out Ticor 16 gauge sinks at galaxytoolsupply.com. Also, MRdirect.com has amazingly inexpensive sinks.

    Are you CERTAIN you want a 50-50 sink? It means neither bowl will be big enough for your roasting pan, cookie sheet, or just about anything. How big is your sink cabinet base? if it will only fit, e.g. a 30" wide sink, you may want to consider a single-bowl sink. You will find lots of fans and converts to single-bowl sinks here on the Kitchens Forum. If you prefer a double-bowl sink, you should consider a 60-40 or 70-30 configuration, so that one bowl will be a decent useful size.

  • 15 years ago

    I agree on the size thing. Once I got a single bowl I realized how much more it held! No more doubles for me EVER!

  • 15 years ago

    hmmm..well I just didnt see the benefit of going to a single sink but maybe I should consider? I have two boys! Do I have to go by the size of my current sink when looking for a sink, or can I do any size since I am having the counters redone?

  • 15 years ago

    I wasn't looking for a sink idea when I went into the Plumbing store awhile back, but there, on display was the Franke Orca and I fell in LOVE!

    It is incredible, it is gorgeous. If you consider going with a single large bowl, take a look at that one with shelves and grids.

    Here's a link to a previous thread with pics.

    Here is a link that might be useful: Scroll down a little on this page

  • 15 years ago

    Your base cab size would dictate how large you can go (there is some "fudge" factor in many cases).

    I've never had a divided sink, always had a single. Since we didn't plan on getting a garbage disposal, everyone steered us towards sticking with a single sink. Very glad we did. We never did the soaking/draining in the sink thing, so a single sink serves our purpose very well. It's nice having a sink large enough to not only hold most of the dirty stuff from a meal (or that piled up during the day!) that needs hand washing, or to wash my 1/2 sheet pans, burner pans, and other large items.

    Ours is 30" wide, BTW. We could've squeezed in a 33" but might have regretted cutting into our counter space had we done so. Definitely glad we didn't go smaller.

  • 15 years ago

    We have a double-bowl 70/30 sink in our new kitchen...and we really like it (Ticor S405D). It's in a 36" sink base.

    The large bowl is wide enough (21.5") for all our pots & pans (including handles), casserole dishes, cookie sheets, hood "squirrel cage" (Vent-A-Hood), refrigerator bins/shelves (except the full-width meat drawer at 30+ inches wide), and holds a lot of dirty dishes.

    The small bowl (10.5") is small enough for rinsing things out, soaking utensils, etc. but still wide enough to fit our 8qt stock pot for filling.

    Our old kitchen had a double-sink in a 36" sink base as well...but the bowls were equally sized. I really disliked that thing. The bowls weren't wide enough for my larger pans, refrigerator bins & shelves, etc. and they were too wide for smaller jobs. A "70/30" was the answer for us.

    If you will have a prep sink, though, I would consider a single-bowl sink, especially if your sink base will be less than 36" wide.


    Look for:
    Gauge of at least 18g, smaller # is better
    304 Stainless Steel
    18/10 Chromium/Nickel content
    Sound dampening (padding and/or coating on outside bottom of sink)
    Satin or Brushed finish
    Overall or Exterior width no more than 1/2" narrower than your sink base (i.e., if 36" sink base, sink should be 35-1/2" or less wide...exterior/overall width)

    Nice to have:
    Offset drain - towards the back gives you more room in front for storage under the sink; in a corner corrals everything on one side of the sink so, again, you have more storage room.
    Grids
    Accessories such as custom-fit cutting boards, colanders, etc.

    Something else to keep in mind is that most sinks do not come with a drain/strainer, so you may have to purchase them separately.

    Here is a link that might be useful: My sink - Ticor S405D