Software
Houzz Logo Print
badin_gw

Granite counter at risk?

18 years ago

Please forgive me if this is a dumb question. I tried doing a search and didn't find anything that addresses our situation. We recently bought a builder spec house. The kitchen island is approx. 5 X 9, plus an attached table at one end. There isn't a deep overhang, such as for a bar, but just an inch or so all around. The counter is slab granite, and I've yet to locate a seam (surely there is one someplace.)

Last night, dh left on all of the kitchen lights when he sat down in the hearth room. He noticed that he could see light beneath the island countertop on the left side. A closer look revealed what appears to be a small wood shim on top of the corner of the base cabinet, where the d/w is located, and a gap that's about 10" long and perhaps 1/4" - 3/8" high running from each side of that corner. It's as if the base cabinet somehow tapers down as it runs toward that corner, and all that appears to support the counter there is a little shim.

Is the counter at risk for cracking due to the lack of support? What would you suggest using to fill in the gap? Dh asked me about trying to wedge in additional shims along both sides, then going along the edge with a caulk tht would nearly match the cabinet color. As long as light cannot show through, I don't think that the repair would show unless someone peered under the counter at close range.

Thanks for your advice.

Comments (3)