Software
Houzz Logo Print
jemr_gw

Aura without primer

17 years ago

Hi, I'm an owner/builder who recently found this forum.

We're at the drywall stage & have been told by our BM rep that if we use Aura paint it won't be as big of a cost difference over using their regular paint because we won't have to use primer with the Aura.

We'll be doing the painting ourselves so labour costs don't count. But not having to do the whole house with primer first would be a plus. (2500 sq ft)

I've read a lot of the posts here about Aura and am pretty sold on the other advantages of it (especially the low VOC's) but am wary about using it without primer. Sounds too good to be true.

I'd like to hear from anyone who's used Aura over new drywall without primer. Does it really work as well as they say?

Jem

jesterkiss.blogspot.com

Comments (10)

  • 17 years ago

    This depends on what system you are using. Were you planning on doing two coats? If you were, then I would suggest primer + one coat of Aura. Primer is cheaper than Aura by far. Just tint the primer so that your finish colors will cover the primer in one coat. I have never really understood the argument that you don't need a primer with Aura...why would I use Aura to prime with if it costs $56 per gallon?

  • 17 years ago

    I think Aura looks better with two coats than one...I like the depth better...but that's me. I HAVE found that one doesn't need primer PLUS two coats of Aura. Two coats of Aura alone are fine. (Unless one is painting over an uncertain or scary surface...such as oil.)

    Not a pro...but I've been doing a LOT of painting lately.

  • PRO
    17 years ago

    The best *brew* IMO is GARDZ first on raw drywall and two coats of Aura. It's the ultimate way to finish a brand new wall. No worries about anything down the road and aesthetically the combo produces a finish that is right up there with some of the finest, most expensive product available to us right now.

    Do the math. The investment is nominal in the grand scheme of things.

  • 17 years ago

    I have an older house...1966...but will need to do some wall/ceiling patching. (Leak in the icemaker we couldn't see until too late...ugh.) Would Gardz be a good choice for priming the walls/ceiling after we fix the patch?

    I never balk at paying for good product...my time is worth the better results I seem to get.

  • 17 years ago

    Priming for Aura:
    Awesome paint (and we have C2!)...BUT...not priming on new sheetrock?!?!?
    * It's too chancey. New "rock" and mud is like painting over quicksand. VERY thirsty stuff!
    * I'd hate to have sheen variations in an expensive paint like that because of the high absorption rate of sheetrock.
    * I realize it's not "my wallet", but I'd prime b4 Aura.
    * If your painters are GOOD, you MAY get by with one coat of Aura. Even with this paint, TWO finish coats is best though.
    * No two painters will lay out the same thickness...
    * Final appearance will be "stunning" instead of "It looks ok..."

    Gardz priming:
    * Very acceptable.
    * However, please realize it's CLEAR when dry.
    * You get no "opacity" help from this product.
    * You can prime with a white primer ON TOP of Gardz though for the "visual hide".
    * Another alternative is a spray primer/stainblocker like Upshot, or Kilz.

    Faron

  • 17 years ago

    When I first posted...I didn't realize we were talking about un-primed sheetrock. Unprimed sheetrock needs to be primed. Period. If for no other reason than it will suck up expensive paint like a sponge...

  • PRO
    17 years ago

    Duration Home actually doesn't do too badly on raw drywall, but it requires two coats for sure. All kinds of different theories about what's best and how to save money and time.

    Truly, I don't think a new wall is the place to save money. You need to buy the best and invest whatever time and money it takes because the way the drywall is treated first is forever. It's not a matter of just a color change; the first coat of primer becomes part of the infrastructure of the walls.

    As Faron pointed out GARDZ is clear but if you're using Aura, you don't need GARDZ to help build color, you just need it to seal and create an ideal foundation for Aura. GARDZ is also stinky and drippy. Kinda rough using it on a ceiling so the other products Faron mentioned might be a better choice for sealing out the water damage.

  • 17 years ago

    Two coats of Aura alone will perform great - even the matte has high resin content and will indeed seal the wall - but if it were my house, I would prime with Fresh Start first then 2 coats of Aura

  • 17 years ago

    no primer sounds like a great idea..if your the guy selling the paint at $56 a gallon!

  • 17 years ago

    I love love love the Aura paint. I used it to paint over a very bright (terrible) orange color changing it to a light tan. It was the first time I did not prime and it was wonderful!

    I would use it for every single paint job if I could.