I'm not following your numbers, and I'm generally good at arithmetic. Most vendors will send samples as part of a larger order. Why not order one of each of the sizes you're looking at and see how they look? It'll take a little longer, but you could spend as long trying to get it right sight unseen.

Alternatively, find something in your recycling, like cleaner's hangers, or cardboard and make mock-ups and see how those look.

We all go through this. It'll be fine. Just breathe.

I'm not following this either. Say your doors are 24" tall. 3/4 or 75% of that would be 18". Mock ups or samples will help with the visualization.

In addition to the breathing, a good glass of wine helps too.

I'm sorry, I posted the wrong number- I really confused everyone!!
...my measurement for my 23 13/16" doors is 17.85", and the correspoding pull that I could find closest is 15 5/8". Do most of you just round up when doing these?

Same answer: Whether to round up or down depends on what pleases your eye better. If making mock-ups is too time consuming just measure off masking tape. How big do you want the gap between pulls? That's the question.

thanks, plllog, that is a good idea! I didn't think of using masking tape to help me with a visual- I will try that!

That's why I love these forums! hundred's of heads are better than one, right? ;-)