Software
Houzz Logo Print
roo514_gw

Granite countertop corners

12 years ago

I'm looking at some slabs of River White granite for my U-shaped kitchen. The issue is, the veining in the slabs have an overall horizontal pattern. Is there a way to transition the pattern in the corners so it doesn't end up being obviously perpendicular, and thus making the seams stand out?

I've been unsuccessful in finding pics, so please post if you have something like this - thanks!

River White (wish I had a better pic, but there was barely any room in front of it, so had to stand on the side)

Comments (7)

  • 12 years ago

    I have a U-shaped kitchen and just had River White installed. I needed two slabs, book matched. They were able to keep the movement running one direction by cutting two L-shaped pieces, one from each slab. This placed the seam in the center of my U, and it blends beautifully. I'll attach a photo of the seam, it's just to the left of my mixer.

  • 12 years ago

    Just like what Errant mentioned, the answer is two slabs. Preferably book-matched. But if they aren't, you can still do it, your seam just may be a little more seen...still your lines could run the same direction. Depending on how things can be cut, you may need just a full slab and part of a 2nd slab. Our fabricator allowed us to purchase 1/3 or 1/2 of a second slab when it turned out that we needed more than just one slab.

    We were able to use our "waste" to make a granite slab for inside our small appliance cabinet and we made matching window sills for our windows.

  • 12 years ago

    Yes, your fabricator will do this... As long as he has enough material to work with.

    We just did a job where we had to use a third slab because the material was an inch to short to get a vein match in a U shaped kitchen.

  • 12 years ago

    Wow, that's genius! Thanks, everyone - it finally makes sense to me.

    Errant, that seam is invisible ... I can only guess that it's where the veins come together in a "v." That's a beautiful job.

  • 12 years ago

    errant- ok i have looked multiple times and can not see the seam! btw i love your backsplash! what is it? we have decided on crema antartida which has the whiteish background of your river white (which is gorgeous) and a similar backsplash might be lovely.

  • 12 years ago

    For the L of our kitchen, the one leg was longer than the short dimension of our slab (but shorter than the long dimension). The other leg was longer than the long dimension of our slab but shorter than the long dimension plus the short dimension. To have the grain run all the same way, we would have had to have two seams.

    Fortunately, our grain pattern wasn't entirely linear. We were able to put both ends of the seam in the area where our slabs were swirly - kind of like the upper right corner on your slab. Also, the sink is on that part of the counter so the seams are short. No one notices that the grain changes direction there.

  • 12 years ago

    Ardcp, the backsplash is Jeffrey Court, "Churchill." It's a mix or split-faced and polished marble.

    And yes, the seam is right at that V :)