Software
Houzz Logo Print
echelon3_gw

can this sink be undermounted?

16 years ago

It's an ikea BOHOLMEN Double-bowl inset sink and I'm interested in undermounting it in a granite countertop. However, I've only seen this used in a butcherblock style countertop as I don't think people generally use this sink for that purpose.

http://www.ikea.com/us/en/catalog/products/S79847468

Comments (8)

  • 16 years ago

    Yes - I suppose you could mount it as an undermount HOWEVER -

    There's a raised flange that is on the perimeter of the sink unit that will
    give your Fabricator trouble - unless he makes the opening stop
    ant the inside aspect of the raised flange - otherwise - IF you try
    to have the opening follow the contour lines of the two sink openings -
    You will have a really tall caulk joint between the steel and the stone...

    Does that make sense?

    I"d look for a sink that is specificaly designed to be used in an undermount
    application - WITHOUT the raised flange around the perimeter of the sink....

    my .02 cents worth

    kevin

  • 16 years ago

    Hi Kevin, thanks for the reply. I was thinking that the sink cutout edge would meet with the inner edge of the flange. Thanks for the advice.

  • 16 years ago

    Echelon3:

    Thanks for your kind words - IF you already have the sink, and want to undermount
    it - that is the way your Fabricator will have to do it - however -

    If I were you - I'd go with a different sink - one that does NOT have that flange
    and is actually designed to be installed as a UMS....

    Have you looked at MR Direct? The have tons of cool styles at great prices

    hth

    kevin

  • 16 years ago

    Hi Kevin... I do have the sink but one of the reasons I liked the IKEA sink was that it had a polished surface (I just don't liked the brushed feel) and the option to make your own holes. I'll look around more, if one cannot be found that is suitable, it might have to leave it as a drop-in. Thanks again foryour advice, it's truly helpful.

  • 16 years ago

    Also, while I like ikea kitchens very much, I have to say those boholmen sinks aren't the best quality. If I were going undermount, I'd try to get a higher gauge sink, like a ticor or artisan, which aren't much (if any) more money.

  • 16 years ago

    Hey Kevin, MR Direct looks very promising. I have a question... they said all the sinks are "Brushed Satin Finish" but the person I spoke to does not know if it has a polished (very smooth) feel to it? Would you know if it did?

    Thanks! And thanks Writersblock, I will look into those as well!

  • 16 years ago

    Here's the place to see ticor sinks, although you can buy them many different places:

    Here is a link that might be useful: Galaxy

  • 15 years ago

    I was looking at a similar sink from Ikea, at 23.5" wide.
    If I were to cut the raised flange off all the way around, would it be a problem to undermount then?
    I'm pretty good with a sawsall, jigsaw, tin snips and most other cutting tools. :)