Software
Houzz Logo Print
akcc_gw

septic: leaky distribution box

19 years ago

Hi, we have a septic system with problems at the distribution box. There is gradual erosion of soil above the tank, with septic water eventually pooling up and over onto the lawn. We dug the tank out (concrete rectangular tank) and discovered that the plastic covers over two unused holes had popped into the tank. The septic water was taking the path of least resistence and bubbling up to the surface. We checked the lines, and they are unclogged and have plenty of volume. I checked the original septic design, and it specifies that a butyl liner be used under the D-box lid. There wasn't one. After replacing the hole covers and covering the tank back up, we still see some erosion happening again. The questions: 1. will a liner under the concrete cover help, and if so, where can we get one? 2. if we cover the tank with less sandy/more "clayey" soil, should that help? Thanks!

Comments (3)

  • 19 years ago

    You mention a "distribution box" and then mention a "tank". Are you talking about two different things? I would think that if you checked your distribution/leach lines and they are clear, that they would be the point of "least resistance." It seems that there must be something going on to cause the sewage to surface.
    Is is surfacing above the septic tank or above the distribution box?

  • 19 years ago

    Something is definitely wrong. You should never see water coming to the surface, no matter what happened to the cover. The path of least resistance should always be out to the leach field. I suspect your leach field lines are clogged. You'll probably need to open it back up and run a hose out each line at full blast to see if it backs up into the box. If so, it's clogged.

    Only other possibility is that you have a leak into the drain system somewhere, pouring more water in than your leach field can handle. I saw that happen once when a mentally unstable woman was running all her faucets night and day to drive the "demons" out.

  • 19 years ago

    A lot of newer septic systems have two leach field with a switch. This is exactly for the situation where a leach field gets clogged or saturated. You can switch to the unused leach field while the clogged/saturated one rests, or simply switch leach fields periodically. I know from experience that letting a clogged or saturated leach field rest can be all it needs to allow it to become usable again (unless there has been physical damage, like driving a heavy truck over a leach field can do).

    -Roger