Software
Houzz Logo Print
kellyeng

Shower Valve Recommendation? No Plastic!

17 years ago

I'm looking for a shower valve with no plastic innards so that it can be installed outdoors. My builder installed an indoor Delta faucet and our first freeze caused the plastic to break and water was pouring our of the sucker. I just want to replace the valve. It needs to be nice looking and not just functional. I found this one valve from Zoe Industries and it looks like it might do the trick.

It's specifications are:

Zoe Orca Shower Valves

- Single Handle Pressure Balancing

- Metal Escutcheon w/ 7" Dial Plate

- ADA Approved

- Metal Lever Handle Lever Control Handle

- Pressure Balanced C x C Copper Connections

- Copper C x C Inlets

- Integral Stops

- Lifetime Warranty

What do you think? Any other brand recommendations?

Comments (6)

  • 17 years ago

    It's not a problem with the innards. Before each winter freeze, you need to shut off the water to that area and drain the line.

  • 17 years ago

    I'm in Texas. We can use an outdoor shower year-round. Yes, the plastic is the problem. I need a valve that can withstand the outdoors.

    That's what my question is specifically addressing.

  • 17 years ago

    It would seem to me that plastic breaks quicker than metal, but metal will still fail if it gets cold enough and you don't drain the pipes.

  • 17 years ago

    "My builder installed an indoor Delta faucet and our first freeze caused the plastic to break and water was pouring our of the sucker."

    No faucet can survive freezing while full of water.

  • 17 years ago

    Freezing water has an amazing capacity for destruction. It can move mountains---literally! NO outdoor faucet, whether plastic or metal, is designed to withstand the destructive forces of ice formation. You need a shutoff valve somewhere that is frost free (like inside or deep enough under the frost line underground) to control the water going to the outside shower. When freezing weather is predicted, the water needs to be shut off and the line needs to be drained. The quickest way is to open the valve and blow out the water with an air compressor.

    If you do not remove the water from the line, and the valve, you will continue to have broken valves and burst water lines.

  • 17 years ago

    I was adamant against pex until a new copper line in my garage sprung several leaks in the winter, so now I have a mixture of copper and pex. So I agree that metal is just as susceptible if not more so than some plastics. I purchased a anti freezing faucet for the outside, but it's never worked right. Although I imagine that something contructed for outside would be better than a delta, would insulate as much as possible.