I think my easytouch set up for my pressure side cleaner is not working properly. I have the cleaner scheduled to run from 3:10 to 6 daily, the mode is "schedule"

I have the intelliflo 4x160 pump

Under "settings", intelliflo-4; 1 of4 rpm = 1700 rpm, circuit= "none", 2 of 4 rpm = 3000 and circuit = "cleaner"; 3 of 4 is rpm = 2150, circuit is "pool"; 4 of 4 is rpm = 3250, circuit = "spa"

I have the pump and filter set to run from 7:30 to 3:00 daily (circuit = pool, pump speed setting 3 of 4 = 2150 rpm).

As stated I have the cleaner\booster pump scheduled to run from 3:10PM to 6:00PM. What I am seeing though is the intelliflo is running in speed 3 (2150rpm - circuit = pool) instead of speed speed 2 (3000rpm - circuit = cleaner) In this mode, the SWG is also switched on. also in this mode, frequently the booster will fail to prime and subsequently run cavitating for 3 hours. (at the higher speed - 3000 rpm I typically do not have this problem).

Any ideas why the the intellifo switches in in speed 3 as opposed to speed 2 as set up in the easy touch?

Bill