coolpool08-

Yep this is possible if you have an open relay to do the switching via the Jandy control panel. I have a low voltage lighting system for our waterfall and I simply installed an outdoor power outlet that is switchable by the Jandy relay. I then plugged the transformer for the low voltage lights directly into the outlet. Now my Jandy PDA P8 can control the waterfall lights whenever needed.

I also have landscape lights plugged into the same switchable outlet and these can be controlled and programmed via the Jandy PDA.

Hope this helps!

Hi Trhought:
Thanks for the info. I do have a few empty relays. In fact I think the pb took an extra when he installed the heater because there are two buttons in the panel labeled heater. Just need to check them but I know I have at least two extra relays. I assume I can do the same with my pillar lights (120v) when i wire them assuming I have the space. Thanks for your input