Software
Houzz Logo Print
chippate_gw

Timbertech T&G (Floorizon?)

20 years ago

My home has a front porch with what I believe is the Timbertech product called Floorizon. I bought the house 4 years ago and my builder told me it was Timbertech. Now, the porch looks like crap. It's stained, mildewed, etc. When I tried to powerwash it recently, large portions of the surface were washed away revealing a much lighter shaded material. As a result, my wife and I are planning to tear out the Timbertech and replace it with a natural wood product - most likely Ipe. Does anyone have any recommendations on how to remove the Timbertech? Also, assuming the product I have is, in fact, Floorizon, what dimension Ipe would I need to replace it? I know the width of the Floorizon is 6" but obviously I can't measure the depth since it's installed.

Comments (6)

  • 20 years ago

    TT T&G is 1 1/2'' thick, to remove it back the fasteners out. J

  • 20 years ago

    You could also just wash it using any commercially available deck wash e.g. Armor-All EZ Deck Wash. For the few bucks that would cost it would be worth a try. Everything gets mildew on it. Usually w/ composites it is normal for the powerwasher to bring it to a lighter shaded new look. Keep pressure below 1200 psi.

  • 20 years ago

    Hi - was wondering if anyone out there has had this problem. I am in the process of having a TT T&G (Cedar) deck installed. The contractor had left some posts on the deck overnight. The next morning when they were moved, I noticed that they left a stain. Should I do anything at this point. I don't know whether to buy a composite deck cleaner or just wait to see if the stain lightens up.

  • 19 years ago

    Who ever posted about the "Armor-All EZ Deck Wash" is out of their mind. It contains Sodium Hypochlorite as the active ingredient.

    Chlorine Bleach or Sodium Hypochlorite (active ingredient in Chlorine Bleach) based deck cleaners that the uneducated recommend may appear to quickly remove mildew (white in color) and mold (black and other colors) fungus from Timbertech and other Composite Decking. Nothing could be farther from the truth.

    The Environmental Protection Agency (EPA) and the Occupational Safety & Health Administration (OSHA) DO NOT RECOMMEND Chlorine Bleach for Mold (Mildew is a species of Mold) remediation on porous surfaces such as Trex and other composite decking.

    The reason for this is that Chlorine Bleach does not remove or kill the roots (mycelium) of the fungus, but actually waters them. A few weeks after you have cleaned a deck with chlorine bleach or sodium hypochlorite based products you will notice the mildew or other mold fungus growing back in greater numbers, especially after additional moisture comes into contact with the deck. It will make the problem worse and harder to remove the next time the composite surface becomes unsightly.

    In addition, Chlorine Bleach products reek havoc on the rest of the deck structure shortening the life of the entire structure. It is highly corrosive to any metal including structural connectors or fasteners (screws) holding the deck together. It shortens the life of the pressure treated lumber supporting the deck. This could lead to liability issues for the owner of the property and any company who recommends its use.

    PRODUCTS THAT CONTAIN SODIUM HYPOCHLORITE ARE ENVIRONMENTALLY DESTRUCTIVE. It is shocking that Timbertech and other composite manufacturers do not follow the recommendations of the EPA or OSHA and recommend one of the most TOXIC chemicals known to this earth.

  • 19 years ago

    So can you use Oxy Clean to clean all wood decks? Or what do you suggest?

  • 14 years ago

    dont listen to that liberal larry. use all the bleach you need, if that doesn't work try some acid or gasoline. he is an idiot chemicals work very well. i bet he voted for obama

Sponsored
Miller Woodworks
Average rating: 5 out of 5 stars23 Reviews
Franklin County's Trusted Custom Cabinetry Solutions