Software
Houzz Logo Print
brandon4589

Pool just finished problems with new ozone system

19 years ago

I spend the last 2 months getting my pool remodeled, it now has a raised spa with a water fall and replastered with diamond brite. It also added a goldline system. The pool also has a delzone eclipse 4 ozone system, my cya is 80 and the rest is balanced, i run the filter pump on high for 4 hours and low for 20 hours. The ozone is always on and the water looks like bottled water, but the chlorine keeps going to almost 0 even after shocking with liquid chlorine within 24 hours, the inline chlorinator is filled to the max and on 5 which is the highest setting and still no free or total chlorine. When I shut the ozone off within 24 hours the chlorine went back to 3 ppm, and stays there when I turn the ozone on it goes back to 0.

I figured out that chlorine is in fact oxidized by ozone to form chlorate as follows:

2O3 + OCl- --> 2O2(g) + ClO3-

Ozone + Hypochlorite ion --> Oxygen + Chlorate ion

So my pool looks crystal clear, no alge yet but no chlorine. What should I do, should i take it out? Is this ozone thing just a scam or just for indoor pools. It doesn't seem to work since the one oxidizer can destroy the weaker one which is chlorine. All the ozone websites advertises .5 ppm, well if you have your chlorine turned on max you may have .5 ppm if you don't run it 24/7 but it sure uses a lot of tabs. Let me know your thoughts.

Comments (7)

  • 19 years ago

    O.K.,

    Well an amateur weighing in on this subject. We have a DelOzone system as well, but it is in combination with a SWCG. Our water is crystal clear as well, and with the SWCG we maintain chlorine levels at or near 1ppm with little to no effort.

    I just re-read your post and realize that you do have an chlorine source in conjunction with the ozone system, so as to why you are not maintaining chlorine, I do not have a good answer. I would start by verifying your numbers through a different test kit and/or your local pool store. It doesn't make sense that with your CYA level you are not maintaining chlorine in your pool.

    By the way, we have an 10 - 11 thousand gallon pool which has a raised 7' spa and our pool depth ranges from 3 1/2 - 5 feet. For sanitation we use the SWCG in combination with the Ozone system. My SWCG is currently (Summer Setting) at 40%, and I run my pump for 6 hours a day, 3 in the morning and another 3 in the late afternoon.

    Good luck with your problem and let us know what you find.

    Regards,

    Mike

  • 19 years ago

    Years ago, when the company I was working for was first involved in the production of ozone mixing systems we performed a very unscientific test.
    We pumped ozone into a 5 gallon pail of highly chlorinated water. The free chlorine level dropped from 5+ppm to 0ppm in a matter of a few hours.

  • 19 years ago

    It seems like we can safely say that ozone does in fact destroy chlorine, the ozone systems that most companies sell are so ineffective that they won't destroy enough chlorine to make a difference, but the high output units like del sells do, i have to top of the line corona discharge at 1,350 PPM of ozone.

  • 19 years ago

    this sounds almost exactly like the issue we're seeing. Our pool finished in mid-July. We have 21,000 gallons with a raised spa. We have an ozinator with the inline chlorinator. The pool keeps measuring near 0, even within less than 24 hours of adding liquid shock.

    I'm calling the pool builder later this morning.

    I'll let you know what I learn.

  • 19 years ago

    For what it's worth, our pool came with a SWG and Ozonator. Since about 4 months ago, I turned off the ozonator and have been sanitizing exclusively with the SWG. I'm not sure of the effectiveness of the ozonator, but my complaint was that it was introducing a lot more bubbles to the water (much more than the SWG does) making the water look cloudy.

    I keep my Chlorine levels around 4-5 ppm and have no problems maintining that with the SWG alone.

  • 19 years ago

    4 to 5 ppm seems a bit high. Unless you have huge bather load, I would turn the generator down some to get a 2-3 reading.

    Ozone is O3. It will oxidize many contaminants but won't kill algae. It will kill off any free chlorine, which does kill virtually everything. No free chlorine = bad.

  • 19 years ago

    Actually, at my CYA level (60 ppm) 4-5 ppm FC is perfect!