Software
Houzz Logo Print
nycbluedevil

Julien sink--minimum cabinet size

14 years ago

I am looking at a 27" inch Julien sink. The company recommends a minimum 33" cabinet size which seems large. From my research, it seems that recommended minimum cabinet size would be 30" for a 27" or even a 28" inch sink. I have even seen on this board where someone installed a 30" Franke Orca in a 30" cabinet by hollowing out the sides of the base cabinet a bit.

So anyone know why Julien recommends such a large differential between the sink size and the cabinet? I could really use the extra space if I can go with a 30" cabinet.

Thanks.

Comments (7)

  • 14 years ago

    >Makes me wonder why Julien isn't more popular on here.

    Well, for me, it's because I love their sinks but not their prices. Can't justify spending that much, nice as they are, and although I'm sure they're worth it. I really wish there were a knock-off of the 27" sink.

  • 14 years ago

    We put a 21" Julien in our 27" sink base. Our kitchen was so tight, I couldn't even eek out another three inches to get a full thirty inch sink base. The upside was minimal filler needed. The sink is a VERY tight fit inside the cabinet. Our plumber opened the doors to connect the faucet - you should have seen the look on his face, somewhat horrified. My husband had to crawl in there to connect the lines because the plumber couldn't fit! Wish I could've been there for that! We are ecstatic with our Julien; yes, big money, but, well worth it! I can fit TWO sets of pots AND dishes in there all at the same time! Yes, in that small sink - it's pretty deep & I'm pretty short. No nasty dirty dishes on our counter since the day that sucker was operable. LOVE IT!

  • 14 years ago

    Hijack SORRY! Cienza, is the interior of your SB 25.5"? The reason I ask - we have a 27" SB as well, and really wanted to squeeze the 25" sink in there. We have a 21" Kraus right now, but when we install our counters (in a couple years ;-)) we'd like to put in the 25" sink. The 21" sink is fine, but it would be nice to have those extra 3"!

  • 14 years ago

    Been lurking for awhile, and decided to join up. I'm a self employed Plumbing & Heating contractor, and I'm about to buy a Julien sink for my new home. I never heard of a Julien sink until I hooked one up for a well off customer. When I first saw the Julien sink, I knew right then and there it was the best stainless steel sink I've ever hooked up in my life. The quality is second to nobody (Oliveri is close), and I thought I could never justify the price either, but my mind changed after this job.

    I've hooked up Elkay - Franke - Artisan etc...and none of those can compare quality wise.

    Anyways,

    I have a 36" cabinet base, and I'm going to install a 33 1/4" x 17 1/2" x 10" Julien sink. It's going to be tight, but I've got the room.

  • 14 years ago

    cluelessincoloroado - 25" sink inside of a 25.5" hole - that only leaves you a quarter inch on each side - and that's if the interior space you've got is actually square and exactly that measurement - I wouldn't even ask - that's going to require some seriously tricky math, steady hands and tiny tools - If it was my kitchen, I would try to refigure the cabinet layout to get a bigger cabinet in there to use the larger sink.

  • 14 years ago

    Great thread, I am trying to put 10 lb of potatoes in a 5 lb bag too... How do these sinks attach and if the bowl part fits down within the cabinet and the flange sits on the cabinet edges, is it enough to fasten around the available front and back and silicon or am I missing something? TIA

Sponsored
Custom Home Works
Average rating: 4.6 out of 5 stars10 Reviews
Franklin County's Award-Winning Design, Build and Remodeling Expert