Software
Houzz Logo Print
rjinga

Coffee Table Project, suggestions?

16 years ago

I bought this CT and it to me has great bones, I can see it working in many different colors.

the problem: the glass top is seriously scratched up. Initially I thought about replacing the glass and tiling say plywood fit to the insert.

Then I thought maybe I could paint the glass (considered doing it in 2 coordinating colors to mimic beach glass (blue & a green color)

I found these tiles today, and will try to place the tiles on top of the glass, and if need be, I might be able to frame out the tile, IF it's raised up higher than the top.

What color can you see working with this tile? Would painting be better? I would paint the top not the underside.

Just fishing for some ideas. these tiles are 3 x 3 each and come in a sheet that is 12 inches square.

{{!gwi}}

{{!gwi}}

{{!gwi}}

Comments (4)

  • 16 years ago

    forgot to post the table :)

    {{!gwi}}

  • 16 years ago

    Interesting tile. I would NOT tile the glass - should the weight be too much, or something get dropped on it (people not realizing it is glass under the tile) your whole table top could go. I would replace the glass with plywood, put on the underside of the opening to create a deeper inset for the tile, and paint the plywood whatever color you are going to use on the rest of the table.

  • 16 years ago

    You're amazing at finding neat things to fix up!
    You said you were considering painting the top side of the glass. Now I can't tell from the picture, but if the glass can be flipped over, you might try painting the current top as you describe, then flipping it so the painted/scratched side is down so it's less likely to chip off and have smoother side up, plus I think I'd just like that with a really pale bluey green.


    If that didn't work, then les' suggestion sounds good.

    And for yet another idea--would beadboard fit into the space and be the right height? You could either cut it to perfectly fit and caulk the edges, then paint, or possibly find a flat molding to go in the inset area.

  • 16 years ago

    great suggestions sujafr...I was considering putting supports on the underside of the table, IF I tiled over the glass.

    I will try flipping the glass, see this is why I ask you gals, you think of things I would NEVER have thought of...brilliant idea if it works.

    I do have some beadboard too, and I guess if I needed to raise it up any (assuming maybe it wasn't thick enough to fill the space, I could do a trim around the edge of the opening where the glass goes with some small molding.

    I think it has a very beachy feel to it dont you? which is why I was thinking of the lighter color frame and then the cool shades of blue/green on top..

    here are the 2 colors I found that came the very closest to some beach glass tiles (decorative ones) that I found at hobby lobby, they were about $5 a bag, and I would have needed so many, that it wouldn't be cost effective. I could also do a coating of poly over the paint to minimize the chipping/scratching.


    I even considered doing a broken tile mosaic of some sort, tile is so expensive...but the one's I posted above were being discontinued, so they went for almost $6 a sf to $.99, cant beat that price. In fact, I bought all they had and if I dont end up using them on the CT, I'll use them for a back splash in my kitchen.

Sponsored
Hope Restoration & General Contracting
Average rating: 4.7 out of 5 stars35 Reviews
Columbus Design-Build, Kitchen & Bath Remodeling, Historic Renovations