Software
Houzz Logo Print
bwaibel_gw

Sink help... please

17 years ago

Couple of questions:

1. If I order a sink on qualitybath.com today, should it be here by next Wednesday? I requested lead time, but haven't gotten a response yet and the granite guy doesn't want to start production until he has the sink in hand (which I am very happy about).

2. I'm looking at a Houzer Medallion Designer sink. I really wanted to get a Ticor, but they don't make the particular dimension that I'm interested in (I want a single basin, DW wants double, we're going for the double with the biggest single). Anyone have any opinions on the Houzer? Good alternatives?

Houzer Sink

3. If DW had her way, we'd just get the ticor S105-8. I'm worried I'll miss the extra 4" width since our cutting board and cookie sheets are all around 20". Am I being unreasonable?

Comments (5)

  • 17 years ago

    What about the S405D?

    Ticor S405D
    Overall: 35-1/4" x 21" x 9" (fits in a 36" standard sink base)
    Large bowl: 21-1/4" x 19" x 9"
    Small bowl: 10-1/2" x 16" x 7"

    The Houzer Sink:
    Overall: 32" x 21" x 9"
    Large bowl: 21-7/16" x 21" x 9"
    Small bowl: 7-1/8" x 17-15/16" x 5-1/2"

    If you have a 33" sink base, then the S405D will not fit without modification; but if you have a 36", it will fit w/no modifications (at least, I didn't need any modifications).


    BTW...will you have room for your faucet behind the Houzer sink? It says the large bowl is 21" deep...if that is the actual bowl size, which I doubt since most have a rim, then you will only have 5" for both the front counter section and the space b/w the sink and the wall. If you assume 2-1/2" for the front piece, then you only have 2-1/2" or so for the back space where the faucet is. If you also will have a tiled BS, subtract another 1/2" or so. (If you have a sink bumpout then you may have already taken care of this issue.)

  • 17 years ago

    I didn't think the 405D would fit into my 36" base. The sides of the cabinet will make the inside span less than 35-1/4". Even if it's cut out, it seems like there won't be room for clips. I assumed that was for a 39" base after getting no response on GW when I asked that question.

    The length on both bowls on the qualitybath site is a typo, those are external dimensions. It seems like a pretty standard size based on the houzer dxf files. We do not have a bumped out sink base though.

  • 17 years ago

    Our sink fit with no problems. The overall width of the sink includes the 1" rim on each side that can go over the cabinet walls. So the bowls that fit inside the cabinet space are really 35-1/4" - 2" = 33-1/4". As long as you have at least 33-3/4" of cabinet space, you shouldn't have any problems.

    The interior of our 36" sink base is 36" - 1" = 35". We have 1/2" walls.

    If you have 3/4" walls, you have 36" - 1-1/2" = 34-1/2"...still room for the sink.

    Here it is in a 36" sink base:

  • 17 years ago

    Thank you buehl, I had ruled the 405D out. I just sent an email to our granite fabricator with the dxf and a link. Hopefully he'll reply that it's not a problem.

    Your kitchen makes me wish we had put our garden window at sink level. It's amazing.

  • 17 years ago

    Thanks for the compliment! I got the idea for the window from right here on GW! We actually had to raise the window to make it counter height. The original window was only 22" off the floor...this one is 36".

Sponsored
Bella Casa LLC
Average rating: 5 out of 5 stars17 Reviews
The Leading Interior Design Studio in Franklin County