Software
Houzz Logo Print
happy2learn

Does anyone have problems with their marble backsplash etching?

14 years ago

Hi everyone. Will a marble backsplash have problems with etching, especially behind the sink and range (I love to make chili and spaghetti!) Will polished marble show the etching much more than honed? I am seriously considering using the "Greecian Marble" tiles that Home Depot sells (and yes, they do spell it, oddly, with two "e's"! Although it is probably considered a low end marble by some--it is perfect for me because it is mainly off-white shades with very little veining to clash with my busy, light colored granite (and I can "pick through them" and get just the shades I want--off white, no bright whites--and then return the rest!)

If anyone has photos of their "Greecian white" backsplashes, I'd love to see them! Thanks.

I have finally narrowed down my backsplash choices to either this marble (if I can find enough with the darker off-white shades by going through the boxes) and if polished marble will not be a problem in the kitchen) or the Adex Hamilton crackled subway tile in bone (with probably some sort of strip of glass mosaics for interests. Any thoughts? Thanks.

Comments (6)

  • 14 years ago

    We have similar granites and I must say, although I really wanted the marble, I do think it would have fought with the granite. I would do the crackle subways myself but that is just an issue of taste and what you like:)

  • 14 years ago

    In the picture you posted, the backsplash does not work. Probably a monitor issue but....

  • 14 years ago

    I agree it doesn't seem to work when looking at your photo..

    To answer your question, etching does happen on backsplashes especially around the cooking area, however most say it's barely noticeable to other people. Honed would probably work better than polished as far as the etches being noticeable.

  • 14 years ago

    Hi,

    I have honed carrara marble backsplash in my kitchen and cook a TON. I have had it for over a year now and do not notice any etching or staining at all. I did have it sealed 2x after installation. The only thing I notice is the grout behind the sink is a little dirty but I wouldn't say cleaning is my strongest talent:o). HTH!

  • 14 years ago

    What I'm seeing on my monitor doesn't work together (marble looks dull and dirty -- more beige while the granite is glossy and grey), but to answer the question, if you put marble on the splash, it will etch. The character and chemical makeup of the stone won't change because you install it on a vertical surface instead of a horizontal one. In fact, your undercounter and hood lighting might make the etching more obvious. On the other hand, splatters on a splash tend to be fewer and smaller than spills on a counter. You have to figure out what bothers you. If you have a low tolerance, look at ceramic or glass. If you think you will be fine with it, look for a better lot of the marble.

  • 14 years ago

    Thanks everyone! I think you are correct about that marble not working--I was thinking that I could cull from the in-store boxes and pick out the darkest ones with no veining, but after looking at it some more in various lighting, I have to agree that I was letting my wishes get the better of my objectivity! Thanks for being honest! I will put up another post with my crackle subway tile sample and get your opinons of that one!
    CKGM--I would love to see photos of your kitchen backsplash, since you said your granite is similar. Did you do subway tiles?

Sponsored
Peabody Landscape Group
Average rating: 3.5 out of 5 stars8 Reviews
Franklin County's Reliable Landscape Design & Contracting