Grommet drapes are easy to make.
- decide on the length and width of your drape. The width should be 1 1/2 to 2 times the width of the window. Add a double 4 inches at the top and a double 3 inches for the hem.
- sew in a piece of drapery header tape (4" wide) across the top and fold over twice and sew down.
- sew in the hem the same way minus the header tape.
- space the grommets evenly across the top, make sure there is an even number of grommets (very important)
-trace the inner circle of the grommet, cut out circle.
-place the grommet on circle and snap together. These directions are usually on the back of the package. If it is hard to get the grommet to snap together tap it with a rubber mallet.
Hope this helps.

Bonnie