Software
Houzz Logo Print
kahlanne_gw

Vintage Sink

16 years ago

I asked this question a while back and did read the answers but can't seem to find the topic now. My memory isn't what it used to be so I thought I would just ask again.

I have always wanted a farmhouse/apron sink but sadly those are quite expensive. It is something I am willing to save for especially since the kitchen remodel isn't right now but I ran across a vintage kitchen sink a while back. It is in great condition with only minor discoloration, nothing I would worry about, and no nicks/cracks apparent. A local antique store has marked down the price from the original of $175 to $100 since I first saw it. It is 6ft long with a tall backsplash which I forgot to measure, approx. a foot, with double faucet holes in the splash. The single sink is only 5"-6" deep but it has large built-in drainboards on each side.

My conscern with the sink is that it is a single bowl when I am used to having double and that it is shallow. Do you think this is a big deterent? I really love the look of it but need it to also work for our family of 7. We have a dishwasher which seems to always be running. Usually there are still a few stragglers that need washing by hand but not many. After washing, we place on drying rags to dry and I thought the large drainboards would be nice to have for this. Hmmmm...opinions? Would I be able to wash pots easily in a shallow sink? Or does that depend partially on the faucet? Currently we don't have a sprayer so I am guessing we could use one hole for a single faucet and the other for the spray?

Anyway, I would love your opinions.

Comments (11)

  • 16 years ago

    I used to live in an apartment with a single-side drainboard porcelain sink. I currently have a 33x22 single Swanstone that we love, but honestly I would kill for that old drainboard sink again. It worked really well for me and as long as the size fits your largest pot, I think it would work. Depth is vastly overrated, I think. Oft-times it only leads to a backache, LOL.

    I don't know if you can easily find a sprayer that is wall-mounted. If not, use a special swivel head that will screw onto any standard faucet. I had one of these - they swivel 360-degrees and the spray/stream worked with a small lever on the head itself. It was great and worked fine for decades. Actually, I currently have a $350 Grohe Ladylux Plus and I think it works worse than that simple swivel head add-on did!

  • 16 years ago

    Generally speaking, the mixer on these type of faucets IS in the body - in front of the sink. The two holes are for hot and cold water lines. The vast majority of them had 8" centers (space between the two holes) and you can buy all kinds of 8" center faucets - but they aren't at the big box store sitting on the shelf. There are also "taps", an entire faucet for hot water and another one for cold. The faucets are completely separate from each other and used for irregular spacing - or for show.


    A Chicago faucet with a particularly goofy spout. I'm sure it can be ordered with a gooseneck or any other style spout.
    Herbeau and Harrington brass have similar, but more refined designs for more dollars.

  • 16 years ago

    I would KILL for a sink like that. The convenience of the two big drainboards makes up for the shallow bowl.

    My method at my aunt's (she had the sink) was to fill the biggest pot with hot soapy water, use it as the "dishpan", rinse with the sprayer and put the stuff to dry on the drainboards.

  • 16 years ago

    Sink sounds great. I don't think depth is so so important. We just had a custom sink made and it is about 8" depth inside. Single bowl is better than two small doubles. You can always put a dish basin inside or on a drainboard to deal with dumping dirty dishes.

  • 16 years ago

    A 6ft vintage sink with double drainboards, that is sure to be the focal point of your kitchen, for only $100? Grab that sucker and RUN! :)

    I've always had a single-bowl sink, once you have one you'll get used to it, especially with the large drainboard areas. Hope you get it! (And if you do, show us!)

  • 16 years ago

    A 6ft vintage sink with double drainboards, that is sure to be the focal point of your kitchen, for only $100? Grab that sucker and RUN! :)

    YES! Run really fast before the seller realizes what he has!I should be so lucky as to ever find something like that!

    I have a single bowl 18x30 farm sink. I can wash cookie sheets and electric oven liners and everything else in it. I would never go back to a double bowl.

  • 16 years ago

    The sink in Arlosmom's kitchen is vintage - came with the house. It's shallow like the one you are considering. When I was thinking about buying a similar sink her comments were very positive.

    My 60'' cast iron sink is new, made by Clarion. It is the 3rd sink in the kitchen (actually in the bakery) so it doesn't get constant use. The bowl is 24'' x 16-17'', 9'' deep. That said, it holds a lot. For example, Friday's baking: 2-6qt. KA bowls, 5 qt KA bowl, 12 qt mixing bowl, 2-2 gal. pitchers, 8c and 2-4c glass measuring cups, 2-2c glass measuring cups, spatulas, 4 bread pans, measuring spoons, knife, plastic measuring cups, and 2 dough hooks. The 2 drain boards are 18'' long, which will hold a small rack. It's not nearly enough space to stack bulky items to be washed on one side and drain on the other. Often I need to dry as I am washing or just carry lots of the stuff to the kitchen's big sink. I think if you have counter space on one or both sides of the sink it wouldn't be a problem. I don't have any counter space by the Clarion sink. I sometimes run water in the largest mixing bowl and wash in that, but I rarely wash in soapy water. Rather, I use a brush with soap in the top.

    Someone, sorry I can't remember who, just had a vintage sink reglazed. It was beautifully done. Don't know about the durability of the glaze.

    Two of my sinks have Chicago wall mount faucets. They came just like the one bmorepanic posted. Both spouts were the wrong length and height for the sinks. Water splashed everywhere including on the floor. The Clarion was switched for a straight 6'' spout, the other sink was replaced with a 12'' straight spout. That solved all the splashing. The look of the gooseneck is much nicer, but it would have been just as high as the original-woudn't work at all.

    Just a couple of other notes: I don't have a disposal in the Clarion. The plumber said one could be installed. He also said there was room under the sink for a dishwasher drawer.

    HTH,
    Judy

    Here is a link that might be useful: Arlosmom's kitchen

  • 16 years ago

    Thanks everyone.

    I love Arlosmom's kitchen sink! The one I saw doesn't have the apron front but is a drop in sink instead. Does this change everyone's opinion? I prefer the apron but again cost is an issue.

    Does anyone know if you can have a disposal in these sinks? I really need one.

  • 16 years ago

    Drop in wouldn't stop me for a minute! I would bet you could have a disposal. It's cast iron?

  • 16 years ago

    hi kahlanne, I just saw this post. If the center drain in the sink is the larger size (maybe 3 1/2" or 4") you should be able to fit a disposal. If it's the smaller 1 1/2" drain, then I don't think you can. We added a disposal to ours.

  • 16 years ago

    i have a cast iron sink like that in my 90 year old bungalow. double drainboards, single sink, apron and backsplash, its 5 feet long. i'm finally remodeling my kitchen and i'm afraid it's not going to fit in. thinking now that i should sell it. gonna miss those drainboards though. can't think of a new sink configuration that will be as convenient. where do other people put their dish drainer?