Software
Houzz Logo Print
lmarletto

Proper exterior sills

19 years ago

I need to know how to make sure we end up with period-looking installation of the windows on our addition. The windows we've spec'd are wood interior, clad exterior, simulated divided light with spacer. The GC we're leaning towards recommends Marvin, but Pella, Anderson and Jeld-Wen could all be possibilities.

I had just assumed that the windows we spec'd would automatically be installed with a real lower sill, similar to the photo shown for this forum. The other day I looked at a neighbor's new Pella Architect series windows and saw that there was no lower sill, just 1x4 trim all around. The window looked like it had a clad part that sloped outward, but wasn't really a sill. Can you put a real sill on one of these windows? Is there a description somewhere of how to install modern windows in an old-fashioned way? I don't want to assume our GC will understand what we want with just a layperson's description.

Thanks for any advice.

Comments (4)

  • 19 years ago

    Is there any reason that you can't show the contractor the windows in the house and tell him you want them to match? I'm a little confused.
    Ron

  • 19 years ago

    Ron: "Is there any reason that you can't show the contractor the windows in the house and tell him you want them to match? I'm a little confused."

    LOL, I guess that's *my* question. *Is* there any reason I can't just show him a window on the old part of the house and say, "Make the Marvin (or whatever) installation look like that?" The Pellas I mentioned above have got me worried. This was a "period" addition by a high end custom builder and, IMO, the window installation looks like the spec homes around here. (Well, except the windows themselves are a lot nicer.) So now I'm concerned that there's something about new windows that makes a traditional installation problematic.

    However, I did see new Jeld-Wen windows with real sills in a new "old" house in the next town. Is that easier to do with one brand than another? Or is it the choice of contractor that makes it easier?

  • 19 years ago

    Some brands have options. Marvin is one manufacturer that can customize their product. Don't know if they have the option you want. If you like Jeld-Wen, go with them. The local dealer can probably give you a few names of contractors that use their windows. If the window you saw is one of a few choices J-W has, take a picture to show the guy. Worth a thousand words.
    Ron

  • 19 years ago

    lmarletto, I think what your seeing on the neighbors house is the old original sill of their windows. Based on what you've stated I think they've had new "Insert" windows installed to their old existing frames. In this application only the old sashes are removed and an insert window is slid into the opening. The outside is then "Capped or Wrapped" with an aluminum coil stock that we custom bend around the old frame. This makes the window maintenance free. So the old protruding sill would be capped off and blended in to the new insert window. This makes it all look new. Hopefully I explained this enough to understand.

    I've done what your talking about in order to keep the windows of an addition looking the same as the others. In order to do this you have to make a separate box with an extended sill and insert the new window into that box. You can also check with who ever makes your windows and see if they offer a "Bull Nose" to extend the sill. I know Pella offers a couple different pieces to fit their window. I'm just not sure what you really need. Good Luck!!!