Software
Houzz Logo Print
garden_of_darwin

Original General Store Cherry Cabinet and Top

21 years ago

Hi all

I usually hang out on the kitchen forum, but thought I might find some helpful advice over here. My current project involves an approximately 80 year old 4 drawer cabinet (30 x 43 x 30 high) like so:

that originally lived in our town's General Store and was used as a fabric cutting counter. (We actually have 2--you can see the feet of the second one in this picture--they are identical, except for wear).

After using Peel-Away to strip it, we found that the main carcass and the top is made of (we think) cherry, although the side panels are plywood. Carcass got 2 coats of Benjamin Moore's Self Priming Wood and Metal Paint in black and the cast iron legs got stripped and will be clearcoated to show off the brushed metal look. The main carcass and drawers will be slightly sanded on the edges for a bit of a distressed look, clearcoated as well, then hand rubbed for a smooth, matte finish. Question now involves the top.

We were planning on marble (until we got prices--ugh), and are now thinking we'll strip the top, and finish it. It is slated for use in our breakfast room as a baking center, so potentially rough (KitchenAid, metal bowls, rolling pins), although I'd probably use a pastry board rather than roll anything on the counter. I don't want anything that will yellow or give off noxious fumes.

Is tung oil the best bet? In a panic today, I picked up a can of 'Tried and True' brand Danish Oil....but don't know if this is a good solution. Salad Bowl finish? I've got 2 small children, one of whom likes to chew, if that helps any. Thanks in advance!

Susan