Software
Houzz Logo Print
magnumv8_gw

Linen press bottom half

18 years ago

I finally finished the bottom part to a linen press I'm working on. I think it turned out pretty good, although if I had to do it all over again, I'd make the horizontal divider between the drawers narrower, and probably use edge-glued panels for the sides instead of frame-and-panel construction.

Its made of red oak; stained with a dye stain, sealed with wipe-on poly, two coats of gel stain, and finished with a few coats of wipe-on poly. I used sliding dovetails for the drawers.

Now that its done, I'm anxious to get working on the upper cabinet.

Comments (5)