Software
Houzz Logo Print
mmanjupriya

Backsplash help URGENT

14 years ago

Hi friends,

As I have said earlier, I am in the middle of my kitchen renovation thru a GC. He just finished the Backsplash tiles and grouted today. It looks good from a distance, but when I look closer, it doesn't seem to be leveled. By level, I mean the tiles themselves are not leveled to each other, are at different depths. They have uniform spacing though.

I used 2x8 Travertine tiles in a subway style and a combined glass and travertine accent tile that runs along the border. Accent tile is not in same depth as the main tile. I am not sure if thats the best that could be done with Travertine tiles. Can anyone please let me know if thats ok? Is there any way to make them level?

Comments (8)

  • 14 years ago

    At this point there is no way to level the tiles short of tearing them out. The installer could have made the accent strip level with the 2 x 8s by putting a deeper bed of thinset under it. In a perfect job, he would not have that edge of tile slightly out of alignment. Having said that, if this photo is representative of the whole job, I wouldn't consider it so bad I'd want to start over. In fact, I kind of think it adds to travertine's charm that every tile placement isn't just perfect. In a little while you won't even notice these imperfections and visitors to your kitchen are unlikely to ever notice.

    We installed our travertine ourselves. The blue glass tiles were a separate sheet that we cut up to replace the odd travertine tile with. Like your accent strip, the blue glass tiles are not as thick as the travertine sheets. We noticed when we were wiping away the excess grout that we didn't get a couple of them just so, but really, this is the first time I've thought of it since the first week it was installed and I'd have to go on a hunt to find the protruders.

  • 14 years ago

    I believe it's called lippage. But honestly, in the picture you provided I only see one spot where it's apparent. To me you backsplash looks nice.

  • 14 years ago

    Yes, in a perfect world, this could have been better. But in the scheme of things, and some of the horror stories we have seen here, yours is not even in the ball park.
    When we do each element of a kitchen we tend to zero in on that element and look for the flaws.
    I think you can get away with this installation because you used the travertine. Travertine in itself is imperfect.
    Live with this for one month. If you walk into your kitchen every day, and you are frustrated and upset, then think about changing it. But, after a month, you will probably be back to business as usual with all your accessories and appliances moved back in, and you will no longer be thinking about the backsplash. Which, looks very nice, BTW.

  • 14 years ago

    Oh, no, I don't think so.
    A professional tile setter could have done that just fine.

    It's not a horror story, but you noticed it which means you'll always notice it. At least I would.

    Talk to the GC and let him know you're not happy. Short of tearing it out right now, you could suggest a compromise. Live with it for a month as suggested. If you still see it, he'll tear it out and do it properly. Get it in writing.

    The thing is, tile is easier to rip out and even salvage now, before things set forever.

    I think your backsplash choices are beautiful.

  • 14 years ago

    I have had terrible luck with tile setters. Did he use spacers? I find that so many of them don't, telling me they do better to eyeball it, but you know I have a hard time believing that. I am curious where you got your tile setter recommendation from? It doesn't seem to matter here or how much you are charged it's still a luck of the draw. It's so upsetting because it is not easy to fix and is such a mess. I don't think your's looks nearly as bad as ours, in fact until you mentioned it I didn't notice it but after you pointed it out I could see what your concerns are. Perhaps worth asking about, good luck! I know how you feel but it really does look nice because of your selections! Very pretty.

  • 14 years ago

    I find that so many of them don't, telling me they do better to eyeball it, but you know I have a hard time believing that.

    And I'm one of those. I'll use spacers to a point, but because of sizing, even spacers can really screw you up.

    As for the OP, I agree with what others have said so far. Not the worst I've seen, but not nearly as good as it should be, especially right next to the centerpiece of the backsplash. As for the mosaics being recessed from the rest of the tile, although they DO appear recessed, they don't appear to be really sunk in, and there's bound to be a bit of difference., Would've been nice if he'd taken the time to build them out flush, but what I'm looking at with respect to the mosaics is not unacceptable.

  • 14 years ago

    Thanks for all your reply. Your replies made me feel better.

    As you all said, its not all that visible in most places, only in few places. I did speak to my GC and he said he can rip those few places only and do the tile again. We figured 2 spots where its more visible and the rest are not very obvious.

    Will post you on updates. Thanks again.

  • 14 years ago

    Sorry you're having to hassle with this. I'm not a perfectionist so to my eye it looks beautiful. Of course, on a computer screen it's hard to see dimension. I'm glad your GC is willing to fix it. Really nice centerpiece. All your choices are lovely. Good luck and please repost when you're all finished!