Software
Houzz Logo Print
melrosgirl

Window Coverings Quote - too high?

18 years ago

4 panels (faux silk fabric, lined). About 96" long. Includes very nice hardware. Professionally done for about $1700. Panels are not full panels (in other words, they won't totally cover the windows if you were to pull the drapes closed.) Does that seem too high? About right? I have honestly no idea. I can price out what it would cost me at JC Penney, etc. if I found fabric there (no where near as nice as this fabric) and it's a lot more affordable, but I have not been able to find anything. I don't want to overpay though. I've never had panels (drapes) before, so I really have no idea. Thanks.

Comments (27)

  • 18 years ago

    That seems a bit high, but you didn't mention the width. Do you know the width of the panels?

  • 18 years ago

    I don't recall the width of them. I know they aren't very wide (won't be covering the window). I should know that, but I don't. (Verbal estimate so far.) DH seems to think the window person said 18".

  • 18 years ago

    Since you chose the fabric, how much is the fabric per yard? Say it takes 4 yards per panel, so you have 16 yards of drapery fabric. You then have a similar yardage of lining (and interlining, perhaps if they are faux silk). The cost of rods/hooks and hardware. I don't know if that includes installation or not? Then labor. Considering that having a simple cornice board made for a standard window can run between $500 and $1000 around here, that doesn't seem out of line to me.

    Maybe Chelone will check in - she would have a better perspective on this. Of course, every area of the country will also have different pricing because of labor costs.

  • 18 years ago

    Before anyone can give you an answer, can you help us out with this information?

    What type of panels? Flat or pleated?
    Are they lined?
    Width of the windows? Width of the actual drapes since they don't cover the window?
    Cost of fabric? Cost of lining?

    Is there a reason for not wanting the drapes to cover the window?

  • 18 years ago

    When I make or buy panels for my patio sliders and windows, I never PLAN to cover the glass, just have the panels stationary on either side, extending (usually) about 10" beyond the glass either side. But, best laid plans...........yada yada yada. I would not buy or make something that could not be pulled close if I so desired. I am sort of surprised that your drapery person is planning such a narrow panel. (Chelone will not be surprised. Nothing surprises her.) And it doesn't seem to me that the windows will look very lush or nicely done if the panel doesn't look as though it could be pulled to meet it's mate.

    Here is a link that might be useful:

  • 18 years ago

    I would never do a panel that narrow. Even when I've made panels for my homes I've used at least 50" panels so that when pushed back, you have a fold that looks like more fabric. But I'm also with Red, for a home I'm going to keep, I'd never have a curtain that wouldn't pull closed if wanted to (the panels I made were used when selling a home so it was a staging thing). But still 18" isn't much fabric at all. When gathered on the end of the window it's going to look really chintzy....I wouldn't pay that much for 18"...no matter the cost of the fabric...

  • 18 years ago

    Thanks for the replies.

    These are for french doors. I already have window coverings on the actual glass, but it's just in white. That provides the privacy, so the designer felt it wasn't necessary to go with a lot of fabric (to keep cost lower). I believe the designer said it was 10 yards of fabric. I do not know the cost of the fabric (I chose from their colors). There are two sets of french doors on the wall, right next to eachother. She is adding the lining to the faux silk fabric.

    As you can tell, LOL, this is all very foreign to me (I normally just order valances), but bc these are french doors I needed something else to dress them up with. I really appreciate your input.

  • 18 years ago

    If you are using faux silk, I would see if the quote includes interlining. It is a flannel-like lining that gives some body to the silk fabric and really makes the drapes hang beautifully. It's only necessary if you are using the thin faux silk. Overall it sounds a bit high but depends a lot on what the going rate is in your area. Also, if your decorator has used this workroom before that is worth a lot. More often than not, you get what you pay for when if comes to workmanship.

  • 18 years ago

    I think you have to decide whether one narrow panel of fabric (2.5 yds and 18"W?) is worth $425 to you. It does sound like it might look like one has skimped. I'd definitely want to know the cost of the materials.

    Personally, I think that's a lot of money for what you describe, and I'd keep looking at the ready-mades.

  • 18 years ago

    THe reason I think it's high is that they're using so little fabric. 18" is going to be about half of a typical piece of fabric. If they're actually a drapery business it's even less. And, if they are a drapery business, they are doing well on the fabric. I purchased 120" wide silk linen for $10 per yard. It's a very high quality fabric. The most I spent at wholesale prices is $40 per yard for italian tapestry. The work is worth something of course, but if they're basic rectangles, no pinch pleats, etc., honey they're a VERY quick product to whip out.

    I'd take your specs and compare the price with someone else. You should be able to get real silk at that price point.

  • 18 years ago

    My guess is the 18" is the amount of space (width) the finished panels will cover the window area when gathered or pleated on the rod. If it is a stationary panel that does not close, I think one width of fabric would be used. Most decorator fabrics are 54" wide. Once the fabric is sewn into lined panels, you'll probably have about 44" or so of width that is then gathered or pleated leaving you very possibly with somewhere about 18". Does that make sense? I really doubt the finished panel will measure only 18" wide. Once it is gathered or pleated, it would be very narrow.

    To answer your question about the price quote, I would look at it this way. $1700 divided by 4 = $425 per panel. But then again, you said that also covers the cost of the hardware, so that's not even $425 per panel. If each panel is using 2.5 yards of fabric and they are lined, this price does not sound out of line to me.

  • 18 years ago

    Melrose, I had single width faux silk panels pleated panels made for my great room that are at least 200 inches long. The panels are lined and interlined and the fabric was $21.95 per yard. The rod and rings was in the $100 range and the workroom cost was $329.

    Hope this helps

  • 18 years ago

    Have you checked out the La Scala silk made to length drapes at JC Penny? A pair of 72" wide by 96" long silk panels is on sale for $257.00 per pair. A nice rod would probably cost you about $50.00 per window. You could do both your doors in real lined silk for about $620.00. You could even order a larger size to cover all of the doors for about another $100 per door. Just something to consider. You'll find them on line, but make sure you check out the made to length drapes to cover your 96" door, the La Scala silk line has many variations.

  • 18 years ago

    Thanks, Everyone. I checked and the panels are 54" (I guess when they are gathered, it will be around 18" or so showing, but the fabric itself is 54".)

  • 18 years ago

    Igloochic, where in the world did you purchase silk linen 120" wide for $10 a yard? I would love to have that!

    Melrosgirl, I'll echo everyone else that you should find out all the stats and then check around. Don't you sew? Or have a friend who sews that you could pay or babysit for or something?

  • 18 years ago

    Ditto with Susan. Unless the fabric is to-die-for special, there are some pretty ready-made panels out there for much less. You do have to worry about putting real silk on your windows though -- uv will deteriorate them quickly. Proper lining, location, and uv-screening on your windows would be an issue to research, I think.

  • 18 years ago

    54" panels at $1700 for four, I think the price is high even if the hardware is included. The fabric is faux silk not silk and the drapes will not cover window, if you should decide you want some privacy.

    Try looking for a dress maker who can sew window treatments. Many do, ask to see samples of their work, and start pricing out labor. You can always buy fabric, lining, and rods.

    I recently found a dry cleaner who sews drapes. I have not used them yet. I think I can negotiate their price if I decide not to make them myself. Their first quote was $150 per panel. Each panel is 81". I would be supplying the materials. I hope this gives you some idea of a price you can look for. I also live in the East where prices are a little higher.

    Deborahnj: I'm guessing you live in NJ. Would you be kind enough to supply me with the name of the workshop you used? They sound very reasonable.

  • 18 years ago

    You mentioned a designer. Is this someone you hired or a designer that's making the drapes? If you hired her, her percentage is probably plowed into the cost of the drapes.

    If you are working with a designer, it won't hurt to get more estimates from other sources so that you're aware of typical charges. Do ask questions! Get a detailed estimate and definitely find out the cost of the fabric, lining and hardware.

  • 18 years ago

    I just had custom panels done for my FR. They are pleated panels that are about 22" wide - so it was almost a width & 1/2 for each panel. My panels were $889 - includes 9 yards of fabric (about $40/yd), lining, drapery rod/rings, labor to sew and labor to install rod and hang drapes.

    I usually make my own window treatments, but this was a treat to have a guy who knows what he's doing install the rod - right the first time, and hang them in about an hour.

    My designer also didn't charge me any extra fee for the fabric and design consultation. She also helped me with furniture selection went and ordered 5-10 fabric swatches for me.

    I will also say, having bought silk ready made panels and while these aren't silk - there's a huge difference between ready made panels and custom ones.

    I only had two panels, and if I had 4 and my bill was $1700 I probably would choke a bit too, but I believe you get what you pay for and these panels are so much nicer than my Pottery Barn silk ready mades. JCPenney silk panels are nice, but again, they're not the quality of custom.

  • 18 years ago

    Based on what I have paid recently for custom work, it is very reasonable.

  • 18 years ago

    Jerseygirl, I moved to Columbus, Oh in February but haven't changed my name. I think it is because I was born and raised in NJ/NY and for me, it will always be home. LOL

    Have you tried Fabricland in North Plainfield? Their rates and fabric prices are pretty decent. Also, when I lived in NJ I had custom drapes made by Home Depot of all places. Again the fabric selection and pricing was pretty good. Having said that, I lucked out in the sense that my local HD had a designer on staff who worked there during the day to make some extra money. Back then, I had two very large swag valances lined and interlined, faux silks for my patio door and sidelights done by HD for less about $3K.

  • 18 years ago

    Thanks again. My decorator found this person to use for the window treatments. The faux silk will be interlined and lined and they are 54" panels (until they are scrunched up). I don't know the terminology. :)

  • 18 years ago

    I think the price sounds reasonable, maybe a little high based on what I've been looking at. IMO, it's not terribly high, so if you like them it's probably not worth the trouble to keep searching. Good luck.

    Caroleoh, could you post a picture of what you did in your family room? I am looking at different types of fabrics and would love to see what you did. Thanks.

  • 18 years ago

    Interlining makes a difference in the feel and "hand" of the drapes.

  • 18 years ago

    melrosgirl, I think that price is high, but I'm cheap! LoL. My main reason for this post is to ask if you are, by any chance, in Massachusetts. I'm from Melrose (although I don't live there now). Just curious. :0)

    Suzieque

  • 18 years ago

    I decided to go with it. I finally found a nice fabric and the ladies have been very helpful (and I've seen the work they've done and it's gorgeous). I can't even sew a button, sadly, so this is the way to go. I looked at Penney's and Pottery Barn, but I didn't find what I have in mind. Here's hoping my vision and my $ get me what I want, LOL.

    Suzieque, I was a big fan of Melrose Place long ago (the tv show), LOL.

  • 18 years ago

    I don't think your price is bad.

    You have about 12 yards of fabric/lining/innerlining. Plus professional install and hardware. Your hardware is not going to be the same as what you get at BB&B or LnT!!

    The biggest thing...you are getting something you love and Nobody else will have!! You have to post pics. LOL

    Smiles:)

Sponsored
Custom Home Works
Average rating: 4.6 out of 5 stars10 Reviews
Franklin County's Award-Winning Design, Build and Remodeling Expert