Software
Houzz Logo Print
jillybeanstalk_gw

taking shine off porcelain tile

18 years ago

I placed an order for a matte sample of a porcelain tile I'd gotten from the tile store, and they mistakenly ordered the glazed/shine tile. It was installed while I was away, and from the first moment I saw it I can't stand the shine!! A rep from the tile store says he thinks he can find a product/person to take the polish off and restore it to a matte finish. I'm worried it will compromise the tile, or not work, but I also know replacing the tile will be very expensive and I don't know if I have a case to make them pay for the labor (which costs more than the tile). Any advice/input on the matter would be greatly appreciated -- I am so frustrated and disappointed and need help!

Comments (18)

  • 18 years ago

    They ordered the wrong tile. Does the sales slip reference the matte or glazed tile? If you signed and paid for the ordering of a matte finished tile; then they are responsible for replacement, labor and all. Did you pay by credit card? If so, you have recourse.

    I'm really sorry you're going through this.

  • 18 years ago

    Thanks so much for your responses. Following up on Bill's comment, I just called the tile place and unfortunately they said it is in fact a glazed tile (he said something about full-bodied?)and that makes removing the shine more difficult. They are currently testing some chemical on a few tiles that he says industrial buildings and hotels use to remove shine and make tiles less slippery. I'm a little skeptical. Do you know about or have opinions about such a product?
    In response to remodelfla, the thing I'm worried about is that I called in the order for the matte sample I'd seen and they wrote up the order for the glazed version of the tile - I then ok'd the order over email, because all that was listed was the tile number, which I had no way of knowing was different from the sample (there was nothing that said 'glazed' or 'shine'), especially since I didn't even know there was any other finish available for the tile. So technically, I ok'd an order for the glazed. Also, I don't think they'd pay for the demo and installation, since wouldn't they only be responsible for the tile price itself?? Any thoughts?
    Also, I really apologize for my double post (also under "removing glaze from porcelain tile") - this is my first time posting and I was a little confused!

  • 18 years ago

    It's possible, but it may change the look in more ways than just dulling the finish, too. It's actually a transparent coating they put on tile to make it less slippery, to avoid lawsuits in public areas like malls and office buildings.

  • 18 years ago

    Don't apologize for anything... I wish I could offer some more encouragement. I can only imagine how disappointing this must be for you. I'll keep positive thoughts for you in the hope that they can resolve this to your satisfaction. Good luck.

  • 7 years ago

    I know this post was from 10 years ago, but your issue is exactly what I'm dealing with currently, except that I ordered shiny porcelain tile (marble look) but now that it is installed in my shower I'm disappointed because it is too shiny. It has reflective light spots all over it. What was your eventual solution? Were you able to create a matte finish? If so, were you happy with the results?

    Thank you.

  • 7 years ago

    I’m searching for the same issue. the tile we ordered is sooo shiny and we’d like to dull the finish to be more matte

  • 6 years ago

    I have the same problem, newly installed subway tiles are too shiny. Can you install subway tile over all ready existing subway tiles?

  • 6 years ago

    Has anyone been able to successfully dull the gloss off the tiles? I loved my tile at the store but it is extremely glossy and always looks dirty.

  • 6 years ago

    Same problem but I wanted a shiny Porcelian floor but no one told me it would show EVERYTHING!! I know it’s my fault for not doing research. I love the look of the shine but it gets dirty ( looks like fingerprints all over a mirror) within minutes of me cleaning it. I also have to clean it on my hands and knees to make sure there are no streaks. A client told me about the E cloth on Amazon. Just wet it ring it out and clean floor to nice shine no streaks. Problem is, it’s a lot of work and the floor looks dirty again after walking on it or if you have pets . Would love to find a solution

  • PRO
    5 years ago

    I don’t have a solution but have the same problem. I will begin the experimental process this week and report back with pics and techniques/results.

  • 5 years ago

    Any luck to make the tile less shiny?

  • 4 years ago

    Just sand it. lol

  • 2 years ago

    Did anyone have luck de-glossing their tile? I would love to make my scalloped backspash porcelain tile a matte finish. It only came in glossy and as we are installing it I really wish it were more matte.... being that it is already glazed and gloss I feel the matte finish sealer will not penetrate/make a difference.... is there any light etching chemical or solution you all found for this?

  • 2 years ago

    Did anyone have luck de-glossing their tile? I would love to make my scalloped backspash porcelain tile a matte finish. It only came in glossy and as we are installing it I really wish it were more matte.... being that it is already glazed and gloss I feel the matte finish sealer will not penetrate/make a difference.... is there any light etching chemical or solution you all found for this?

  • 2 years ago

    Did anyone have luck de-glossing their tile? I would love to make my scalloped backspash porcelain tile a matte finish. It only came in glossy, and as we are installing it I really wish it were more matte.... being that it is already glazed and gloss I feel the matte finish sealer will not penetrate/make a difference.... is there any light etching chemical or solution you all found for this?

  • PRO
    2 years ago

    I'd try a hogshair pad on a variable speed grinder.

  • 7 months ago

    I have the same problem, coverTec - glaze guard, anyone have used this product?