Software
Houzz Logo Print
chiefy

Sink vs. Base Size Question

15 years ago

I have a small kitchen and trying to literally make every inch count. I wanted the Blanco Diamond 24" sink, but I wanted to put it in a 26" sink base. I emailed Blanco customer service if that would work and she responded "The Diamond single bowl undermount sink needs a 27" cabinet for proper installation. The sink itself is 24" and you need at least an extra inch of space underneath your cabinet for proper installation."

If it only needs "at least an extra inch" shouldn't I be able to shrink my base to 26"? What can I do to know for sure if that'll work?

Comments (11)

  • 15 years ago

    web search "sink setter" and post again when you understand how to use it.

  • 15 years ago

    "post again when you understand how to use it"

    Seriously?!?

  • 15 years ago

    A more general answer: the rule of thumb is that your sink base needs to be 3" longer than your sink, which is how you get from your 24" sink to a 27" sink base. However, any number of people on this site have put sinks into bases that are less that the required 3" longer. Some do it by creatively carving bits from the side supports on the the base and some just seem to fit into the smaller base without difficulty. Some don't. This seems to depend on the particular sink. Hopefully someone here will have actually placed the Blanco Diamond 24" sink into a 26" base, or tried to and it didn't work. Either outcome would be helpful to you to know about.

  • 15 years ago

    How thick are your cabinet sides? If 3/4, then a 26" cab gives you only 24.5" inside space. Might be possible to get a 24" sink in there, but I'd prefer a little breathing room when maneuvering a large, heavy object. Can I talk you into 26.5"?

  • 15 years ago

    Angie is right. The most common mistake people make is forgetting that a cabinet's stated dimensions are usually outside dimensions. For an undermount sink, you need to factor in the inside dimensions of the cabinet.

  • 15 years ago

    People regularly ask if they can change out an undermount sink if there is a problem with it. The answer is, yes, if you left enough room to be able to change it out. This is one of the reasons that a sink requires a base 3" larger than itself. Scooping out bases is done all the time, but it voids warranties, and it leaves you with zero options if replacement ever becomes an issue.

  • 15 years ago

    chiefy76-are you working with a cabinet company? I got a great deal on the undermount sink of my dreams only to find out it required at least 39" base (sink is 35" wide without the lip and 37" with the lip). Cabinet guy said he could make it work with the 36" base by cutting down the sides of the cabinet. The sink is in and no problems. If you've got a cabinet company you're working with, they may be better able to tell you. From my experience, the manufacturer reps on the other end of the line at the call center will only tell you exactly what is in the product literature. You could try asking at your local Blanco dealer as well and see what they say. Hope this helps!

  • 15 years ago

    When we were shopping for a sink, we were told the "rule of thumb" was that the overall width of the sink should be at least 1/2" narrower than the cabinet. It sounds like the "rule of thumb" is more of a "my (KD or GC) rule of thumb" than a general one!

    I think a more general "rule of thumb" is:

    For an undermount sink, if you do not want to modify the sink base to fit the sink, then a sink with an overall width no wider than the interior space of your cabinet will fit.

    So, if you have a 26" sink base cabinet with 1/2" walls, that means you have 25" of interior width. You should be able to fit a sink with an overall width of 24". Is the 24" you mentioned the interior width of the sink or the exterior/overall width that includes the sink rim? (Most rims that I've seen are 1", so if a sink has an interior of 24", when you add the rim on each side to the width, you have a sink approx 26" wide overall.)

    In our case, we have a 36" sink base and were able to put in a 35-1/8" wide sink (overall/exterior dimension). No modifications were necessary to our sink base. Our sink base has 1/2" walls, so that means we had an interior width of 35".


    If you're willing to modify your sink base, you might be able to get away with a slightly wider sink. However, when you modify a cabinet, in most cases you void the warranty.

  • 15 years ago

    Thanks everyone!
    The exterior dimensions of the sink are 24", the interior is 22".

    The cabinet line I'm considering is 3/4" construction so there would be 24.5" space available. I don't want to get into scooping the cabinets and risking not being able to get the sink out if there's a problem down the road.

    So it definitely seems doable, but I'll triple check with the cabinet maker and GC before I do any ordering.

    Here is a link that might be useful: Blanco Diamond Single Specs

  • 15 years ago

    Keep in mind that some cabinets are built with corner blocks. Depending on the size of those corner blocks, it could cut into the interior dimensions as well.

  • 15 years ago

    Good catch, jscout. I hadn't thought of that!

Sponsored
Wannemacher Interiors
Average rating: 5 out of 5 stars26 Reviews
Customized Award-Winning Interior Design Solutions in Franklin Cnty OH