Software
Houzz Logo Print
zazutoo_gw

Kindred sink

16 years ago

I found this Kindred sink on my local craigslist and do not know anything about the brand. Advice? It is generally what I want -- stainless, 2-bowl of the same size. I could buy it for installation next spring. Any cons in this plan? Check out the link if you please.

Suzanne

http://madison.craigslist.org/mat/2029438332.html

Comments (5)

  • 16 years ago

    I would not buy it. Primarily because two bowls of equal size is a poor choice. Neither bowl is very large. If you want a two-bowl sink, better to buy one that is 60-40 or 70-30 proportion. Furthermore, if you can only do a 30" sink size, it would be better to do a single bowl sink if possible. A two-bowl sink in a 30" size won't give you a very large bowl for soaking roasting pans or pots. Having said that, many people want a two-bowl sink, can only do a 30" size, and they are OK with the size of the bowls, as long as they are not the 50-50 proportion. So you have several decisions to make as to what is most important to you -(a) to have a 30" size (i.e. can you fit larger than 30"?), (b) to have a 2-bowl sink, or (c) to have a single bowl that will fit anything.

    Also, this sink is a "zero radius" sink, meaning the corners are very sharp 90-degree corners. The look is great, but there have been posts on this forum that the sharp zero-radius corners collect gunk, and are a pain to clean. You can get a similar look, with slightly softer corners - sometimes you see them called 5mm corners, or "tight radius" corners. Ticor sinks, Elkay sinks and Kraus sinks have several.

    The price of $250 for a 50-50 sink isn't such a bargain. Go to overstock.com or galaxytoolsupply.com or mrdirect.com and you will find 16-gauge sinks in better configurations in that price range.

  • 16 years ago

    Also, the sink is not a Kindred sink. The ad says "Made by the same manufacturer as Kindred sinks", so I am not sure what that means. AFAIK, Kindred makes 18 gauge and 20 gauge sinks. The sink is advertised as a 15 gauge, which is better. Frankly, brand names on sinks don't matter much in any case. Better to get the size and shape you want, and not worry about brand name.

    Here is a link that might be useful: Craig's List Sink Ad

  • 16 years ago

    Thank you! Good advice was needed. I was tempted, but size does make a difference to me. The advice saved me a trip to look at the sink.

    Suzanne

  • 16 years ago

    For what it's worth, I have a Kindred sink - made in Canada. I like it very much and the quality is great. As I wanted something made in North America, I was very happy with the price as well.

  • 16 years ago

    If you need a second opinion, I agree with everything AKChicago said! Overall size, bowl sizes, single- vs double-bowl, etc.

    We have a double-bowl sink...but...it's in a 36" sink base and the bowls are 70/30. Our old kitchen had a double-bowl sink in a 36" sink base but the bowls were equal sized...and I really disliked it since the bowls were too small for cookie sheets, etc. and too big for smaller tasks such as soaking utensils, etc.

Sponsored
Whisler Home Improvement
Average rating: 5 out of 5 stars9 Reviews
Franklin County's Committed Home Improvement Professionals