Software
Houzz Logo Print
lau123rie456wise

Is there differant ways to do glazing?

16 years ago

I think I want to have my new painted cabinets glazed. I don`t want them to look "messy" though. Am I correct that you don`t have to have the cabinets glazed "all over"? That is what makes them look messier than just having the creases glazed, am I right? I want to be sure I communicate the look I want to the person doing it. He is an Amish man and while I trust he will do a good job, I know he doesn`t do it very often. I`d like to hear from you painted cabinet owners that initially thought of glazing and chose not to. Are you glad you didn`t do it or wish that you had??

Comments (4)

  • 16 years ago

    There are many many different ways to glaze. But, what you DO NOT want to do is to give the job who "doesn't do this often." This is a job for a professional painter or faux finisher. The look you want is usually called "pencil glazing" and it's only applied to the door details before it's wiped off. Different people have different techniques, and every single person who does this will have a slightly different result than the person next to them doing the same job. This is a labor intensive look, and I'd expect an upcharge of $1500-$2000 for the average kitchen to finish cabinets out with glazing and a protective topcoat. And that is if you have a cabinet finishing professional who does this often in his shop after the cabinet's have been built but before they've been installed. After installation, it's a lot harder job and the price goes up commensurately. This IS an area you could potentially DIY to save money, but you'll need several flea market finds to practice on before tackling your cabinets.

  • 16 years ago

    For some examples, check out the link below. It's Omega's "Glazes" page and lists & describes five different types of glazes:
    Dry Glazing
    Pen Glazing
    Wet Glazing
    Highlight Glazing
    Brushed Glazing

    Here is a link that might be useful: Omega Cabinetry glazes

  • 16 years ago

    I second what live wire oak says. Glazing is an art. I had glaze over white done in the existing/tweaked cabinets in our last house and it was just magnificant, the man was an artisan. I saw many of his samples before hiring him, and he did a finish sample before we went forward. I interviewed others too and there was SUCH a difference. Here, we were going to do the same thing. I interviewed one so far and he sounded so good I asked him to do a sample. It was pitiful. His idea of glaze didn't even look like glaze it just looked like someone had used a foam brush to apply a little tint. The glaze he left in the cracks around the raised panel looked like they had forgotten to apply the paint there! Also, the finish of the paint was ripply. Just a night and day difference. I would not go forward on anything like this without a full door sample. You may have to pay for the sample but it's well worth it.

    Was going to pay the last man to come out but it was so expensive we could get new cabinets, which I think we may just do. The jury is still out on that.

  • 16 years ago

    I am a professional *faux finisher* and live wire is absolutely right to say you need a pro. Glazes come in many different applications: from an all-over glaze to a simple color embedded in the moulding. It can be "messy" or controlled. The color of the glaze is also an important consideration. If you are using someone who has not done this very often, insist on a sample. It's not brain surgery, but it is a skill.
    They can, however, be glazed after installation, especially if you choose to use an artist and not the cabinet maker. Price depends on how many cabinets. And, if done after cabinets are finished, you will need to use an oil glaze.
    Since you are having these custom built, it is something you can be very specific about.

Sponsored
Custom Home Works
Average rating: 4.6 out of 5 stars10 Reviews
Franklin County's Award-Winning Design, Build and Remodeling Expert