Software
Houzz Logo Print
jane_o

plugmold - sitting on backsplash, or between backsplash & cabs?

19 years ago

We're speccing plugmold, and our KD isn't sure whether we should end the glass tile backsplash below it, so the plugmold is sitting on the wall just above the backsplash below the cabinets, or whether we should do the backsplash all the way to the cabinets, and have the plugmold sitting on it. How do others do this?

thanks!

Comments (5)

  • 19 years ago

    Mine isn't in yet but my GC recommends mounted on the bottom of the cabs about 1" from the backsplash to avoid scraped knuckles.

  • 19 years ago

    So will you have paint in that 1" between the backsplash and the plugmold, then?

  • 19 years ago

    no, I don't think she'd have to paint it; it would just be the underside of the cabinet, finished whatever way the underside is finished.

    I have my plugmold on the underside of the cabinet facing down, and I like it because that means the cord isn't sticking out (bcs of the plug itself) and then bending stiffly down.

    Instead, the cord extends straight down, up against the backsplash, and the cord falls straight down.

    True, I have to lean over to aim, but you have to pay attention anytime you're plugging something in. It's not that hard (of course, I'm short)

  • 19 years ago

    My plug mold is mounted between my cabinets and backsplash at a 45 degree angle. I saw this on someone's posting and showed it to my GC who thought it looked great (it does). He had the cabinet installers rip a piece of maple matching my cabinets at a 45 degree angle and the electricians then mounted the plugmold. I especially like that I don't have to lean under and crane my neck to figure out where the plugs are. This technique also eliminates the knuckle-scraping problems mentioned above. It can also solve some wiring issues because you could fish wire across the back. I have stainless plugmold installed and love the way it looks.

  • 19 years ago

    I had my GC look for plugmolds that were installed at a 45 degree angle. He couldn't find any. Never thought of having a piece of molding ripped.....

    I'm going to put a mirror in a drawer so I can set it on the counter to help me aim at the right spot.

    As for painting, the cabs have a skin on the bottom that matches the finish on the fronts. My backsplash goes right up to the bottom of the cabs. So when the plugmolds are installed we're done. ::whewwwww!:: ...and after only 9 1/2 months.