Software
Houzz Logo Print
greengirl

Backsplash in kitchens ?

13 years ago
Is there a right or wrong time when to use the 4" backsplash that matches the counter? I see most pics I like don't have it. Does it pop of easily?

Comments (12)

  • PRO
    13 years ago
    last modified: 13 years ago
    Hello Greengirl,

    I don't like these 4 inch "backsplash-strips" either. ☺ They are usually only attached to the wall. To take them off is therefore mostly not a big deal. Just cut with a raiser knife the caulk between the countertop and the backsplash-strip and go with a putty knife or a small chisel behind the backsplash-strip. If you want to keep it, be a little bit careful.

    Regards,

    3D-Tile-Design - Bertram Tasch
    Maple Ridge, BC (Greater Vancouver)
    http://www.3D-Tile-Design.ca
  • 13 years ago
    I agree with Bertram and would add they look like a 'poor man's backsplash!
  • PRO
    13 years ago
    If I remember correctly, you are the one with the refrig that doesn't work in your kitchen??? As you deal with your other issues go ahead and have your "new" contractor (if that is the way you go) remove it. It is going to tear off the paper part of the wallboard so there may be some repair unless you are going to put in a full tile backsplash of some sort. If so, don't bother with the repair.
  • PRO
    13 years ago
    Hi greengirl!
    I'm going to have agree with the above comments and say the 4inch continuation of the counter generally looks a bit skimpy. When the backsplash is continuous from the bottom of the cabinets to the top of the counter, it just looks more intentional and finished.
  • PRO
    13 years ago
    I agree with the above comments. Generally, 4" stone backsplashes are only used in a bathroom (especially when no tile backsplash is being installed there). We have a couple of customers here and there who ask for it because they do not like the look of tile right next to their countertop, but not many.
  • 13 years ago
    I'm really glad I asked this question. One of those easy, simple steps that add so much to a design.

    And yes, I'm that refrigerator disaster. Just got finished banging my head against the wall. :(, everyday we find out something else.
  • PRO
    13 years ago
    Ben Moore has a kitchen paint called Aura. If you are not intending to add a decorative backsplash and would like to forego the generic 4" solution; painting an accent color in Aura is a nice simple solution. Aura allows for easy cleaning.
  • 13 years ago
    If the backsplash goes right against the counter - how do I keep the grout clean from messy spills on the countertop or splatters from my stove?

    I would love the tile from the countertop to cabinets; but my old grout already has ugly, ugly stains from wear and tear.

    I've heard there are grout sealers, but does that really work when spaghetti sauce splashes up on the grout?

    Thanks!
  • 13 years ago
    Try this method to clean your grout, it's worked every time for me. Cut an orange in half, and rub the cut side on the grout, squeezing as you go. Let it sit for a minute or two (don't let it dry) and scrub gently with a nylon scrub brush. Rinse and wipe dry.
  • 13 years ago
    Great idea! I see scrub gently with a nylon scrub brush - does even scrubbing gently remove a little bit of grout? Thanks!
  • PRO
    13 years ago
    You can also get grout cleaners from a local tile store. Just be sure they won't ruin your countertop should you get any on it. You can use wide painters tape at the joint between the countertop and backsplash and some plastic on the countertop for protection. Once clean, use a grout sealer. Put it on several times until the grout no longer absorbs it. The use it every couple of years. It will make a big difference.
  • 13 years ago
    Scrubbing didn't remove any grout for me, just years of yuck. The grout came back to its original color. However, if your grout is loose, anything you use will remove the loose grout.
  • PRO
    13 years ago
    Hello Duroc,

    You mentioned a good point. There are a few ways to prevent the grout against staining. The best way is to use right from the beginning an appropriate grout like an epoxy-grout. It is also possible to use instead of water a grout enhancer to mix the "standard" grout (Only use a high quality grout !) However this solution is not as good as an epoxy grout.

    If your tile-work is already done and also grouted, you can proceed as Deborah Butler described. You can also use this method do seal your grout which you already mixed with the grout enhancer to get an extra protection.

    Another option is using bigger tiles with leads in less joints. Furthermore Cross-Joints are easier to clean than T-Joints like you will get when you tile your backsplash in subway-stile.

    Regards,

    3D-Tile-Design - Bertram Tasch
    Maple Ridge, BC (Greater Vancouver)
    http://www.3D-Tile-Design.ca